Pensacola, FL11 Mold Inspectors near you

Where do you need the mold inspector?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Pensacola Mold Inspectors

Browse these mold inspectors with great ratings from Thumbtack customers in Pensacola.

  • 4 years in business
  • 5 hires on Thumbtack
Sandee L.
Verified review

Jason of Nano went above and beyond to take care of our mold issue in our motor home. Not only did he meticulously remove the mold, but he also addressed the source of the problem by getting on the roof and temporarily fixing the leak. He was professional, thorough and reasonably priced. I would highly recommend Jason, a very nice person to work with.

  • 6 years in business
Spencer A.
Verified review

Used Jack Clausheide and PuroClean for a house I own that had been closed up for a couple of years. Needless to say there was mold present as well as some rodents that needed to find a new residence. Jack came in and did an assessment of what was needed to be done and the price was very fair and reasonable. The work was done promptly and on schedule as well as professionally. I would definitely use Jack Clausheide and PuroClean again. Very good experience! Spencer Adams

Ken V.
Verified review

Toby was knowledgeable in regards to structural issues and wind mitigation. He was pleasant and performed the work in a timely manner.


We are an AHIT Certified home inspector. We have 20 years experience in subdivision development and heavy equipment operation. We have completed 300 course study hours of training with the leader in home inspection studies in American Home Inspection Training Institute.


We provide professional and quality inspections of homes, condos and commercial structures. We have over 30 years' combined experience.


We are licensed through the State of Florida, and are members of several trade organizations that are nationally recognized. Additionally, the owner of the company is a Certified Restorer. This designation has only been awarded to a few hundred professionals in the world.


Element850 is your full-service disaster restoration firm based right here on the Emerald Coast. We are locally owned and operated. Whether your disaster is from a small bathroom or water-heater leak, a mold-contaminated room, a burnt building or kitchen fire to regional flooding or a hurricane, we are ready and prepared to assist you. From the person taking your call to the technician responding to your individual needs, you can be sure of three things: we are your neighbors; we are highly certified, licensed and trained, and we are here to help you. Our services include the following: * Water Mitigation * Mold Remediation * Indoor Air Quality Assessment * Fire Restoration * Smoke Deodorization * Pet Deodorizing * Structural Drying * General Contracting * Board-Up Property * Carpet Cleaning * HVAC Cleaning * Contents Restoration


Services include the following: * emergency water extraction * mold remediation * mold removal * mold testing and consulting * fire damage restoration * duct cleaning * odor removal * smoke odor removal * pet odor removal * indoor air environment testing and consulting * Large structure dry outs


Exceeding expectations, Coastal Home Inspection Professional Services is a board-certified Master Inspector, providing a full range of home inspections, wind mitigations, four-point insurance, mold inspections, certified stucco inspections, and certified infrared evaluations. We hold FL State Lic. #HI582 and MSRA376. Please look at our website and/or give us a call.


I'm a state-certified residential contractor and state-licensed home inspector. I can do all types of home improvements and inspections.


We are a home inspection company located in Daphne, AL and service all of Baldwin and Mobile Counties in Alabama. We are also home builders, so we know what we are looking at when doing a home inspection. We are thorough and honest. We are there for you if you have questions before, during and after the inspection. * Free 90-day limited warranty on our inspection * Free RecallChek (appliances, HVAC, water heater) * Free de- and re- winterization if needed * Free 1 Year Membership to Home Owners Network (HON) Visit our website for additional and detailed information.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

What is a mold remediation?

Mold remediation is the process of identifying and removing unhealthy levels of mold that have colonized in a home, office, school or other building. Over time, if untreated, mold can destroy a home by breaking down cellulose-based materials (like wood or ceiling tiles) and causing a slow and messy decay. In the shorter term, a mold infestation can cause severe health problems. According to the Federal Emergency Management Agency (FEMA), mold can trigger respiratory problems, nasal and sinus congestion, eye irritation, nose or throat irritation, skin irritations, problems with your nervous system, and aches and pains. Mold inspection and mold remediation are often requested in tandem, although they are two separate services. Nationally, mold inspection costs range from $250 to $300. If mold has been positively identified in your house, either by visual examination or through mold testing, remediation can safely remove it. Properly trained and equipped professionals use specialized equipment (like vacuums and air scrubbers with HEPA filters) to keep mold spores contained while they remove contaminated materials and treat infested areas with antimicrobial spray. A key component to a successful mold remediation after eliminating the mold is ensuring that the water source that caused the mold infestation is also resolved.

How does mold remediation work?

Mold remediation can eliminate mold colonies from your home or business. Mold is a normal part of daily life, but in wet or humid settings mold can quickly colonize and spread by making spores. Whether visible or hidden, untreated mold can cause real health problems and cause extensive (and expensive) damage to your property. Mold remediation involves killing the mold, removing the dead mold and preventing future mold growth. Here is an example of the steps involved in professional mold remediation:

  • Contain work area and apply negative air pressure HEPA air purifiers to prevent cross-contamination. If spores spread, the colonies can easily regrow elsewhere in your home.
  • Mist an EPA-registered antimicrobial to suspend and kill mold spores.
  • Remove affected building surfaces.
  • Bag and dispose of contaminated materials properly.
  • Treat cavities/underlayment and dehumidify.
  • Abrasively remove dead loose mold.
  • Apply EPA-registered protective sealer.
  • Perform clearance testing.

Remove containment materials.

How is a mold test done?

Mold testing can help identify a mold infestation in your home or business. Mold inspection costs can vary based on the type of test you want done and the number of samples you request. The national average mold inspection cost is $250-$300. The EPA explains that if you have a visible mold problem, in most cases sampling and testing is unnecessary. However, if you have unexplained and potential mold-related illness or can smell mold in your house, mold inspection costs may be a good investment. To avoid unscrupulous testers, the EPA recommends working with a testing agency that adheres to the analytical methods laid out by professional organizations such as the American Industrial Hygiene Association or the American Conference of Governmental Industrial Hygienists. Mold inspection costs can vary based on the type of testing done. Prices can also vary, depending on the size of the home, the number of surface areas to be tested, and the extent of the mold infestation. Here are some examples of mold inspection average costs:

  • Swab testing: $200-$300
    • A professional collects a surface swab from a potentially infested area for testing in a lab. Some professionals have concerns about this being the sole test done because it only gathers a small amount of data from a certain area of the house. That’s why it’s frequently done in conjunction with air cell testing.
  • Air cell testing: $250-$350
    • A professional collects an air sample in the home to measure the amount of mold spores in the air. This test is frequently done in conjunction with swab testing to ensure more complete data. Costs are higher for this test because the equipment required of the contractor is more expensive.
  • Both air cell and swab tests provided by the same company: $400-$600.

How do you get rid of mold?

Mold is a naturally occurring and important part of our ecosystem. That said, excessive mold can actually be hazardous to your health. Mold remediation is usually the best strategy to get rid of unhealthy levels of mold in your home or office. If you’re not comfortable working with mold or the area is larger than 10 square feet (3 feet by 3 feet), it is highly recommended to hire a mold remediation professional to resolve the problem. However, if you’re DIY-savvy, don’t have any health risks, and are not freaked out by mold, the EPA gives homeowners the greenlight to clean mold areas that are less than 10 square feet. Here are some EPA-recommended DIY cleaning tips:

  • Fix plumbing leaks and other water problems as soon as possible. Dry all items completely.
  • Scrub mold off hard surfaces with detergent and water, and dry completely.
  • Throw away absorbent or porous materials (like ceiling tiles and carpet) if they become moldy.
  • Avoid exposing yourself or others to mold.
  • Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel.
  • If you are unsure about how to clean an item (art, fine furniture, etc.) consult a reputable specialist affiliated with a professional organization in their field.

Is mold damage covered by insurance?

Mold damage may or may not be covered by your homeowner's insurance. Mold damage is caused by standing water and excess moisture. Mold damage can be covered by insurance when an item already covered under your homeowners insurance breaks accidentally — for example, if your plumbing suddenly ruptures and water floods your house, the homeowners insurance will cover part or all of the costs for the plumbing repair and any mold remediation costs necessary as a direct result of the water damage.

But you may not be able to get insurance to pay for your mold remediation costs if the damage is a result of your neglect — for example, if you’ve had a slow leak under your bathroom sink for years and have ignored the issue. If the insurer can determine that the mold damage is a result of your negligence, they likely won’t cover mold remediation costs. Also, most homeowners insurance will usually not cover mold remediation costs after a flood unless you have a special insurance rider covering your home in case of a flood. To help prevent mold damage, always keep humidity levels in your house between 30 percent and 60 percent, clean up water spills and damp areas right away, and ensure you have exhaust fans in your kitchen and bathroom.

Hire skilled professionals for absolutely everything.