The average cost of fence repairs is around $250, with most homeowners paying anywhere between $200 and $300. Fence repairs have a wide range of potential costs, however, ranging from $50 to as much as $1,443. The cost of your fence repair project depends on multiple factors, including where you live, what type of repair you need, the terrain and the fence materials used.
Contact several fence repair professionals near you to get an accurate cost estimate for your fence.
A gate can sag for a number of reasons. One common reason is that the screws holding the hinges in the wood or other post material have come loose, causing gravity to pull the fence down. Another common problem is the gate post’s lack of stability. Posts can become loose and start to lean, or if they are wooden, they can even rot at the point where they meet the ground.
The most common fence repairs are aimed at fixing:
- Missing boards or slats. This is a common problem with wood fences.
- Fence material corrosion. This occurs on metal fences like chain link and iron.
- A sagging gate. This could result from a tilting fence post or loose hinges.
- Post movement. Typically, this is caused by frost, corrosion or water.
- Stains. Moisture and other elements can stain fencing, which may require a professional to remove it.
- Warping. Warped, curled, cupped or bent boards are unsightly and less effective and need to be replaced.
If you notice any of the above issues with your fence, reach out to fence repair professionals near you to start getting cost estimates and schedule an appointment.
Fence repair is better for common problems that only affect small areas, such as a broken picket or a shifting fence post. However, there is a rule of thumb to follow: If the repair project requires replacing 20% or more of your fence, it’s probably time to replace the whole fence. The exception to this rule is if the fence is fairly new and just part of it is damaged.
Gates can be more expensive to fix than other parts of a fence, and there are several reasons for this. The first is that gates are the only moving parts on a fence — hence they have more components that can wear out, as well as friction and the potential for rusting and sagging. Fixing a gate may require a total replacement or simply replacing certain components like hinges. Sometimes, the repair may involve fixing the surrounding fence.
Contact several gate repair professionals near you to get an accurate cost estimate for your gate.
Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:
- Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
- Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
- Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
- Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
- Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.
The most common gate repairs tend to be associated with a sagging gate. A gate repair professional will check the hinge system. If the hinges have come loose, they will detach the gate, set the hinges in the proper location and reattach everything.
Another common repair is replacing or repairing a sagging fence post by digging a new posthole and/or using a concrete footing.
Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.
Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.
The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.
If you think your gate needs reinforcement, hire a fence repair professional in your area. Squaring up a fence gate may require adding corner brackets, installing a cable and turnbuckle, and cinching and tightening the cable to the appropriate tension. All of these repairs, as well as digging a new post hole, require expertise and know-how.