Waterproofing a basement costs between $500 and $3,500, on average. The cost depends on several factors, including the type and extent of waterproofing, as well as the amount of labor involved to complete the job. For example, the labor cost to apply concrete sealer is about $3-$12 per square foot. And adding an interior drainage system costs approximately $700-$2,600.
There are a number of different pros who perform basement waterproofing, including specialized contractors and companies. Your best bet to ensure your basement’s waterproofing gets done the right way is to search for local professionals who can perform the service. This is easy on Thumbtack, where you can enter your zip code and the desired service, and then make your selection after viewing customer ratings, reviews and project photos.
Paving contractors can be hired to install a concrete or asphalt driveway at your home, office or property. They can also repave an asphalt or concrete driveway that has been damaged by time, weather or heavy loads. When you are looking for a driveway contractor, request quotes from at least three professionals who are in good standing and have great customer reviews. They should do a site visit and write you a bid, detailing the work involved, materials needed, approximate length of the project and estimated cost.
The site for your new driveway will determine costs and the work required for your contractor. First, the ground must be excavated to lay a clear path. This means removing any trees, bushes and stumps. Next, the driveway contractor will grade the area, making a level surface for the concrete or asphalt. To ensure proper drainage, driveway contractors should install a sub-base of compacted gravel (or similar) 4 inches-8 inches deep, depending on your soil type. Then the concrete or asphalt may be poured and smoothed over the top. Your driveway contractor should recommend an appropriate sealant for your climate and advise you on curing time. When hiring a paving contractor, check out our tips for smart hiring on Thumbtack.
Waterproofing your basement can help you prevent major water damage caused by heavy rains — which means you won’t have to pay for expensive water damage restoration services. Waterproofing systems also prevent basement flooding and protect your possessions. And by keeping your basement dry, you can also prevent mold growth (and avoid having to pay for mold remediation services). Finally, your basement floor may last longer, your sump pump will work less and your home’s foundation will be more protected if you have a sound waterproofing system.
Because unsealed concrete is porous, it readily absorbs liquids, leading to unsightly stains and freeze-and-thaw cycle damage. For this reason, it’s important to seal concrete that will see spills or outdoor weather.
The best option for garage floors and other high-traffic areas is epoxy, which forms a hard and extremely durable surface on top of concrete. Epoxy, acrylic, and polishes are often used on indoor floors, while acrylic-resin sealers and reactive penetrating sealers are used on outdoor surfaces to repel water and salt. Locate a concrete contractor in your area to help find the best solution.
There are several great options for waterproof basement flooring. For example, epoxy floors are waterproof but are thicker and sturdier than paint. Make sure the concrete substrate has been prepared for application.
Tile is a designer’s dream, giving you a moisture-resistant surface that’s infinitely customizable. Rubber sheets or tiles are also good waterproof options, particularly for playrooms, workout areas or laundry rooms.
Vinyl tiles and planks imitate wood or other materials very convincingly, provide moisture resistance and last a long time. And sheet vinyl is affordable and a great waterproofing solution for those in need of quick fixes.
Basement waterproofing is the process of using various materials and techniques to keep water from infiltrating a house or building’s basement. Basements tend to be quite vulnerable to rises in the water table or to events like heavy rains. Waterproofing a below-ground basement might involve applying sealant materials to keep water out, as well as installing drains and sump pumps to remove water. Basement waterproofing is best performed during construction but is often done retroactively as well.
Here are some examples of average costs:
- The national average cost to hire a concrete specialist is $2,750, but that price can vary greatly depending on the work needed to repair and resurface your concrete driveway, the square footage of the project, current costs of concrete, and regional labor rates.
- Driveway contractors average $2-$3 per square foot to smooth and resurface your asphalt driveway.
- Resurfacing concrete driveways averages $3-$10 per square foot. Pricing can depend on repairs needed, project size and geographic location.
- Nationally, the average cost for resurfacing a 500-square-foot driveway ranges from $2,000 to $5,000.
- Sealant for a concrete drive can cost $20-$80 per gallon.
- Sealant for an asphalt drive averages 25 cents per square foot.
The best finish for concrete floors depends on your personal taste. An acid stain is a bold, varied look with lots of texture and the potential for earthy tones and a natural stone appearance. A water-based stain might not last as long as an acid stain, but it gives you the choice of many different colors. Epoxy is great for high-traffic areas, kitchens, bathrooms, basements and garages. It provides a glossy, damage-resistant, non-slip coating on your concrete floors. To find out which finish is the best for your concrete floors, contact a concrete contractor near you.
Masonry contractors build structures with smaller units like bricks and stones, binding them together with mortar to form a larger structure. Concrete contractors, on the other hand, only use concrete to form structures. This mixture of cement, water and other materials is poured into a premade structure and left to cure, forming a single structure made on one part.