Newark, NJ26 sheet metal fabrication services near you

Where do you need the sheet metal fabrication service?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Newark Sheet Metal Fabrication Services

Browse these sheet metal fabrication services with great ratings from Thumbtack customers in Newark.

IVCustom
4.9
from 16 reviews
  • 3 years in business
  • 20 hires on Thumbtack
Andrew W.
Verified review

Joe manufactured two stainless steel sled-type cabinet legs. Not an easy job, but Joe did it well and quickly. Very satisfied.

Elk fabrication
5.0
from 3 reviews
  • 5 years in business
James C.
Verified review

ELK DID ME WINDOW GUARD FABRICATED OUT OF STEEL. THE STEEL WAS ALSO ZINC METALIZED AND POWDER COATED (BLUE). SHOP DRAWING ALSO WAS DONE FOR THE JOB. WORK WITH SMOOTH WITH HIM.

Mahoney's Metal Fabrication
5.0
from 2 reviews
  • 3 years in business
  • 4 hires on Thumbtack
Brendan K.
Verified review

Very prompt, responsive and rates are very reasonable. Very high quality work, will be recommending and reusing in the future. Also was able to get it done on very short notice. Overall, great experience- working with Joe was a breeze and I look forward to using him again for future projects.

Dennis D.
Verified review

Maher was very helpful and the work was done fast and the quality was good.

Andrea W.
Verified review

I called Lewis-Hasenfeld because I wanted to spruce up my Manhattan apartment, from the very beginning they (Christian Lewis) were incredibly helpful and sensitive to my needs. I have a very small apartment and needed some help with not just decor but also making the little space I have effective. They started by compartmentalizing the closets then went from there. They then designed and fabricated a gorgeous glass and metal shelving unit and matching dining table for me which I was able to afford because they helped me pick out the rest of my furniture on Craigslist and saved me an huge amount of money while still purchasing some wonderful pieces for me (including some wonderful original artwork for the walls). Christian was great at working together with me and from picking colors to hanging the artwork I really felt that it was an honest collaboration. Within 2 weeks my apartment was organized, more spacious and had an actual continuity in regards to theme. I would highly recommend Lewis-Hasenfeld to anyone considering re-doing the interior of there space, they are a pleasure to work with, my friends are all amazed at the transformation and when I tell them how much it cost me they really can't believe it.

About

Testing and troubleshooting within electronic systems and components are offered. The following are offered: * Forklift operation and all pallet moving equipment * Metal fabrication (machinist) * Plumbing and drains * PLC testing and troubleshooting * Electronics panel building experience * In-shop electric wiring * Small carpentry repairs * Map reading and delivery skills

About

Founded in 2000, Metal Men Fabricators specializes in sheet metal fabrication, including shearing, punching, laser cutting, bending, drilling and tapping, welding and spot welding as well as complete installation of HVAC systems from 1.5 to 50 tons. We are conveniently located in Ozone Park, Queens. We are skilled craftsmen with years of specialized knowledge and understanding, fabricate parts to specified tolerances. So when the success of your business depends on the ultimate in quality control, precision and service, you can trust your metal working needs to Metal Men Fabricators!

About

I do welding with TIG, MIG and stick in material such as aluminum, stainless, brass and mild steel. I also do metal fabrication and machining.

About

I have nine years of experience in welding all types of metals and all types of metal fabrication. I am really looking for full-time work but will take any job.

About

For over 30 yrs., J&E Metal Fabricator, Inc. has established a dominant reputation in quality, consistency, reliability and outstanding customer service.

About

Custom metal fabrication, prototyping, and design shop are offered. We manufacture high-end metal furniture, architectural elements, stairs and railings, and much more. We build and install. We are specializing in steel, stainless steel, aluminum, metal patina finishes and wood. We offer 20 years of engineering manufacturing experience, with an artistic flare and superior service. Over the last two decades, we have honed our skills in business, designing and fabrication, so we can offer our clients the best experience that money can buy. In so doing, we offer cost-effective approaches to time-critical projects, while at the same time, staying within our clients' budgetary constraints. We are dedicated to providing our clients with the highest level of craftsmanship, quality and reliability. We can be counted on to provide the guidance and planning our clients need to assure the successful completion of their projects.

About

Services offered: * Custom sheet metal fabrication * Commercial and industrial metal roofing and siding panels * Metal girts * Flashings * Fasteners and closure strip * Translucent fiberglass panels * Commercial box gutters and accessories * Flashings and trim to 20' long * We roll form 4.2 corrugated steel and aluminum painted and unpainted (corr asbestos replacement panel) * Custom formed metal panels * Perforated metal and aluminum panels, corrugated and ribbed Any panel can be perforated. We ship nation wide.

  • 6 years in business
About

When becoming involved in a prospective clients projects, we start with their requirements and proceed from there so customer gets exactly what they are looking for. Each project is created to provide a lasting quality and guaranteed craftsmanship. The fact that no project is exactly the same. The variety and sometimes complexity of each job keeps us on our toes and brings welcomed challenges, keeping us always learning and brushing up our skill set. Love trying to create a better more efficient product. Guilty for the privilege of trying to re invent the wheel, so to say.

About

We are a steel fabricator specializing in structural and miscellaneous metals. We offer a wide variety of products such as custom metal rails, fire escapes, windows guards, overhead doors, and specialty metals such as stainless steel, aluminum, and bronze.

About

We are a custom metal fabrication, prototyping, and design shop. We manufacture high-end metal furniture, architectural elements, stairs and railings, and much more. We build and install. We are specializing in steel, stainless steel, aluminum, metal patina finishes and wood. We offer 20 years of engineering manufacturing experience with an artistic flare and superior service. Over the last two decades, we have honed our skills in business, designing and fabrication, so we can offer our clients the best experience that money can buy. In so doing, we offer cost-effective approaches to time-critical projects while at the same time staying within our clients' budgetary constraints. We are located at 349-351 Elm Street, Newark, NJ 07105.

About

I do metal fabrication and repairs. No job is too small. I will travel and do welding repairs on site. I will also help come up with designs and ideas. I went to welding school, and ever since, I have been passionate about the trade.

  • 19 years in business
About

We fabricate ducts for air conditioning and heating systems. We custom cut and bend all sheet metal from .026 to 1.25 mm thick, steel #4, aluminum (all collars), and carbon steel. We also do TIG, MIG, stick, and spot welding.

About

We custom cut, bend and weld all sheet metal from 26 ga up to 12 ga. We do the following: * Galvanized sheets * Carbon sheets * Aluminum sheets * Copper sheets * Brass and bronze sheets We also fabricate custom duct work for A/C and heating units. We do all kinds of welding, including the following: * Stick * Meg * Tig * Spot welding

About

We offer high-end waterjet services for sheet metal fabrication projects. Our customers receive the highest quality of service because of our great attention to detail and our vast networking resources.

About

I do welding and fabricating of all types of metal working. I also do ornamental, sheet metal, structural and custom fabricating.

About

This company provides one of the best service metal work shop, with experience in steel, aluminum and stainless steel fabrication.Custom manufacturer's of stainless steel awnings and canopies, stainless, Is a everyday challenging job there no other company that do watt Omega Development do. Seeing the finish product and satisfying the client.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How long is welding training?

Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

How much is welding training?

The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

How many types of welding are there?

Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

  • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
  • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
  • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
  • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
  • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

Where can I take welding classes?

Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

Hire skilled professionals for absolutely everything.