Find a temporary fence professional near Las Vegas, NV

Find a temporary fence professional near Las Vegas, NV

82 near you

Find a temporary fence professional near Las Vegas, NV

82 near you

Confirm your location to see quality pros near you.

Zip code
Avatar for Welders 1st Choice Las Vegas, NV Thumbtack
Avatar for Welders 1st Choice Las Vegas, NV Thumbtack
3. Welders 1st Choice
4.9
from 70 reviews
4.9
(70)
4.9 (70)
In High Demand
In High Demand
  • 20 years in business
  • 79 hires on Thumbtack
  • Serves Las Vegas, NV

Online now

"I am now happy with my gates thanks to Terry and his company WELDERS 1st CHOICE. TERRY IS A HONEST MAN OF INTEGRITY AND TAKES PRIDE IN HIS WORK, AND CRAFTSMANSHIP. In 5 hours on site Terry refrabricated my gates in the blistering heat . Terry and his crew of two, cut down 6 inserts for holding glass cleaned up the welds and repainted. Cut new striker holes for deadbolts so I could remove the ugly plate that covered poorly drilled holes. Cut down post on west gate so height matched the wall and welded caps back on. East gate removed fence panel, and post. Removed all iron from house and wall. Repaired hole in stucco and block wall. Removed black silicone from wall cement. Repainted stucco and wall to match house and wall. Cut off 4 hole plates from wall section of fence. Installed appropriate 2 hole plates. Cleaned up welds and repainted and reinstalled level to wall. Cut off hinge side post from fence section, and moved it forward 5 inches. Cut plate and rewelded post level, and resecured plate in new location. Cut off one hole plate, 1” sleeve and 1 1/4 extension, between hinge post and fence. Installed more appropriate 1 1/2 material between hinge post and gate. Welded in screw hole and cleaned up affected area from old post location. Removed screws, silicone, and spacers from old post location. Removed screws and spacers from old location of posts and replaced with more appropriate 1 1/2 piece of material between hinge post and bottom of fence to match bottom rail of fence to strengthen post. Also, for a cleaner look , rehung gate. Cut down striker post , and welded to plate at proper height to match the decorative design of the gate, and concrete. Cut off tab at the bottom of striker post, as it was unnecessary, and added another plate to the top so the post was level. Moved post forward approximately 5” to match gate. Resecured plate flat to the ground. Resecured top tab with screw. Cut new striker hole for lock. Terry also repainted all areas he worked on including my brick stucco wall. He did not use any silicone to fill in bad craftsmanship. He used welds and good measurements and if corrections were needed he did the work over again. I wish I would have found WELDERS 1st CHOICE first would have same me time and frustration. You know when you find a good guy when other Welders know his work and recommend him. THANKS TERRY FOR FIXING MY HORRIBLE CUSTOM GATES. TERRY AND HIS CREW MADE IT RIGHT."

Temporary Fence Companies Cost Guide

  • $
  • $$
  • $$$
  • $$$$

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How much does it cost to install a wood fence?

Help define your property line, protect your home and yard, and boost your curb appeal with a new wood fence. The national average for wood fence installation cost is $3,250. Wood fence installation costs will vary based on your geographic location, the type of wood you select, the height and style of wood fence you desire, and the condition of your property. Pressure-treated pine is a common and attractive choice that is usually resilient against rot and bugs. Cedar is another budget-friendly option that, although more expensive than pressure-treated pine, can be more affordable than redwood or teak. A wood fence requires maintenance to ensure its long-term health and beauty, so keep future staining and painting costs in mind when you’re calculating fence installation costs. Here are some examples of how height and material affect the approximate cost of wood fences:

  • 6-foot-high, pressure-treated pine fence: $15-$17 per linear foot.
  • 4-foot-high, pressure-treated pine fence: $13-$20 per linear foot.
  • Cedar fence: $18-$25 per linear foot.
  • 6-foot-high, double-sided (meaning both sides are uniform), pressure-treated pine fence with 6x6 posts: $25 per linear foot.
  • 12-foot-high, pressure-treated pine fence with custom detailing: $75 per linear foot.
  • 6-foot-high, pressure-treated pine fence with a custom lattice top: $30-$50 per linear foot.

How much does it cost to install a fence gate?

Adding a gate to your fence can be a practical way to provide access to a yard, work area or outdoor living space while ensuring safety and privacy. Gate installation costs will vary based on the gate material you select, the size of your gate, whether you install a fence at the same time, and any special features you’d like to add. Standard opening size for a single-wide gate is 4 feet; a double-wide gate is 8 feet. A small gate may be for decoration; a double-wide gate can be mounted on a rolling caster system to allow access for cars or wide loads. Here are some examples of average fence gate installation costs:

  • 4-foot, single-swing chain-link gate: $100 for materials and installation costs.
  • 28-foot wheeled chain-link gate on a caster system: $800-$1,000 for materials and installation costs.
  • 4-foot, single-swing wood gate: $75.
  • 8-foot double-wide wood gate: $150.
  • 4-foot white vinyl walk-through gate: $300–$400 for materials and installation costs.
  • 8-foot, double-wide white vinyl gate: about $800 for materials and installation costs.
  • White vinyl gate fence more than 8 feet wide: $1,200-$1,500 for materials and installation.
  • Arched black powder-coated aluminum pool gates: $175-$200 per gate.

How much does it cost to install a vinyl fence?

A new fence can mean added home value, increased curb appeal, and improved home security. The national average vinyl fence installation cost is $4,600. Vinyl fences have a number of appealing qualities such as their durability, their lasting good looks (they don’t weather like wood does), their versatility, and the fact that they require little to no maintenance such as staining. Fencing companies typically charge per linear foot for vinyl fence installation. They calculate their estimates based on materials to be used, height of fence, linear feet of the proposed fence, and the accessibility of the terrain. If the workers need to level the land before work begins, your vinyl fence installation costs will probably increase. Vinyl fences are typically more expensive than wood or chain-link. For example, one company might charge $19-$22 per linear foot for a basic 6-foot vinyl privacy fence. Another company might charge $25-$35 per linear foot for standard vinyl fencing, while decorative fencing with custom detail could increase that cost to $50 per linear foot. For a 6-foot-high white vinyl privacy fence with two walk-through gates (plus demolition and disposal of the old fence), the cost of the total project could run $8,000. A 4-foot-high, 36-linear-foot white picket vinyl fence with one gate could cost $2,600.

How much does it cost to put up a chain-link fence?

Chain-link fence is one of the most affordable options for adding safety and value to your home or business. The national average chain-link fence installation cost is $2,750. Chain-link fences are relatively simple for the pros to install; a fence of less than 150 linear feet can often be put up in under one day. A good rule of thumb is to add an additional workday for each additional 100 linear feet of fence to be installed.

Chain-link fence installation costs are affected by the fluctuating cost of steel, regional labor rates, the height of fence you select, and the features you select, such as a powder-coated finish. The industry standard is galvanized steel, which is rust- and corrosion-resistant. Galvanized chain-link fence installation cost, including labor and materials, is typically $12 per linear foot. For a more contemporary and elegant option, black powder-coated galvanized chain-link fence might cost approximately $15 per linear foot on average, including materials and labor. For industrial sites or businesses, 10-foot-high galvanized chain-link fences may provide additional security, but also have an added cost. A 10-foot-high chain-link fence could cost $17-$18 per linear foot, including labor and materials.

How much is a redwood fence per foot?

A redwood fence is a long-lasting home investment that can add beauty and major curb appeal to your home. Redwood fence installation costs are higher than those for pressure-treated pine or cedar, due to the relative scarcity of the wood. Pricing can vary for redwood fence installation costs based on regional labor rates, current prices of redwood planks, the height and linear feet of the fence, and any custom designs or features. Redwood fences, in addition to being beautiful, are naturally more resistant against bugs and rot than less hardy or dense woods. Redwood fences also generally fare well in wet or humid climates due to their natural oils — which also make them easier to maintain. Materials costs per linear foot for redwood planks can range anywhere from $6 to $20 or more, depending on grade, quality and height.

Why hire professionals on Thumbtack?
Free to use

You never pay to use Thumbtack: Get cost estimates, contact pros, and even book the job—all for no cost.

Compare prices side-by-side

You’ll know how much your project costs even before booking a pro.

Hire with confidence

With access to 1M+ customer reviews and the pros’ work history, you’ll have all the info you need to make a hire.