Sumter, SC8 Furnace Installation Professionals near you

Where do you need the furnace installation professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Sumter Furnace Installation Professionals

Browse these furnace installers with great ratings from Thumbtack customers in Sumter.

  • 6 years in business
  • 42 hires on Thumbtack
Dave S.
Verified review

Mike was responsive, professional, on time, charged what he quoted and was far far lower in price for his installation services. He not only removed and installed my new oil furnace , he found me a better price on a new furnace from a reputable supply house and provided a great warranty on his work.

  • 4 years in business
  • 19 hires on Thumbtack
Latee C.
Verified review

Andy installed a thermostat in my living-room. He is easy to contact, responds promptly, knowledgeable, work is neat and very affordable! I will hire him again and recommend him to others.

L&S Hvac Services
5.0
from 12 reviews
  • 7 years in business
  • 3 hires on Thumbtack
Trina B.
Verified review

L&S Hvac services gave me 5 star service. From A to Z I knew I was gonna be taken care of. When I called Stephen came over the same day to look at my a/c unit and gave me advice on what was going on with it. And on installation day he was on time and ready to work, very professional. I recommend L&S Hvac services for anyone I come in contact with because of their customer service, punctuality and professionalism.

Carolina Comfort Inc.
5.0
from 6 reviews
  • 26 years in business
Cole M.
Verified review

They installed the system at my house when it was built back in 2012. Has ran perfectly since with no problems. Great professionalism and the technicians are truly talented and knowledgeable about what they do.

AIR & HEAT PROVIDER LLC
5.0
from 4 reviews
  • 18 years in business
Thomas K.
Verified review

Air & Heat Providers are an excellent choice when you have HVAC needs. They replaced a heat pump in my condo and I found the entire team to be exactly what I expected in terms of removal, installation and follow-up. Great job and certainly recommend AHP for your HVAC needs.

  • 5 years in business
  • 3 hires on Thumbtack
Kyle F.
Verified review

I needed a new heating and air conditioning system and Joe came out and gave me a free estimate on a forced air system (Uses duct work) and a VRF system, the initial install costs more but it cut my power bill almost in half by switching over!

Moore's Heating and Air
4.7
from 3 reviews
  • 5 hires on Thumbtack
Carl L.
Verified review

Installed a new dryer vent, into the crawl space and then outside. He was very professional and pleasant, and the price was very reasonable. He was careful to clean up not only the debris due to the repair but the build-up that had taken place over the years. Highly recommend this service provider.

  • 1 hire on Thumbtack
Gail Q.
Verified review

Service provider is reliable and skilled. He quickly honors his service guarantee. Product provided has worked well since service installation.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

Who fixes furnaces?

If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.

How much will it cost me to replace my furnace?

The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.

How much does it cost to replace a gas furnace?

The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.

How much does it cost to have your furnace cleaned?

To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:

  • Checking the vent connection pipe and chimney
  • Checking the physical integrity of the heat exchanger
  • Adjusting the controls to provide optimum air temperatures
  • Checking the combustion chamber for cracks
  • Testing for carbon monoxide (CO)
  • Adjusting the blower control and supply-air temperature
  • Cleaning and oiling the blower
  • Removing soot and corrosion from the furnace
  • Checking the fuel input and flame characteristics
  • Sealing the connections between the furnace and the main ducts

How much will it cost me to replace my air conditioner?

If your AC system is in need of replacement, the national average air conditioner installation costs range from $2,930 to $3,670. Costs can vary greatly depending on whether you are replacing a wall or window unit or a central air system. A central air system is connected to ductwork that runs throughout your house and pumps cooled air into your various rooms via vents and registers. A central air conditioning system is far more costly than wall or window units. Selecting a central AC system that has a high seasonal energy-efficiency ratio (SEER) will likely lower both your carbon footprint and your utility bill. The type of AC system you select, where you live in the country, and the regional costs of HVAC work, duct removal and replacement, and ductwork repairs that are needed are some of the main factors that affect the cost of new air conditioner installation. Here are some examples of average costs for installing forced-air systems.

  • Install Lennox 16 SEER single-stage AC unit: $5,743
    • Removing and disposing of the old furnace, moving and reconnecting the water heater, and installing a 3.5-ton gas furnace. The job took 18 hours of labor.
  • Installation of a new 14 SEER single-range cooling system: $4,000-$6,000
  • Installation of a new 16 SEER two-range cooling system: $6,000-$8,000
  • Installation of a new 20 SEER variable capacity cooling system: $8,000-$12,000
Hire skilled professionals for absolutely everything.