Seattle, WA5 Electrostatic Painters near you

Where do you need the electrostatic painter?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Seattle Electrostatic Painters

Browse these electrostatic painters with great ratings from Thumbtack customers in Seattle.

  • 25 years in business
  • 27 hires on Thumbtack
Inez P.
Verified review

Paul has done a variety of work on my rentals and on my several personal residences over the past 20 years. He called my number by mistake in 1994, and it turned out I was looking for someone to build me some steps, so it wasn't a wrong number after all--it was a fortunate coincidence. He is skilled in every phase of construction, knows the code, and never takes shortcuts which jeopardize the finished work, be it plumbing, electrical, painting, or remodeling/construction. Paul knows what tools to use and that makes all the difference in time required to do a job and the quality when it is done. Paul has built two storerooms for me, rebuilt a porch, I've seen balconies he has rebuilt, he's installed linoleum in several of my rentals, laid tile, remodeled a kitchen picking out beautiful cabinets, remodeled several bathrooms, put in a jetted tub, repaired water damaged sheetrock, texturing/painting (he's done lots of that for me), repaired a water leak in foundation wall, found where windows were leaking and repaired them, installed dining room fans, redid the ducting and installed bathroom fans where there were none, switched out all the old interior doors for 6-panel doors, installed mirrored sliders, installed vertical blinds and window blinds, opened the stairway wall to facilitate air circulation, squared the exterior storeroom doors so they closed properly, replaced all the exterior locks, replaced the interior door knobs installed recessed lights, hid all the wires in the wall behind the TV, he's a master at making molding look great and fixing the weird spots so they aren't noticeable. The tile around my fireplace I love--it is marble and stainless steel tiles we found at Lowe's--he picked it out. To coordinate, Paul used stainless steel tiles again and burgundy colored glass tiles (from Lowe's again) for the kitchen. It coordinates so well. And that is one thing Paul has--a good eye for decorating ideas. He's replaced toilets, sinks, vanities, you name it. Once he found a pin hole leak in the bathroom wall behind the toilet that no one else had been able to find. I'm rambling here trying to recall all the various projects he has done for me. One thing where Paul has been a great help is acting as a consultant. When I had water in my dining room he was very helpful in filtering what the various contractors told me so that they could not take advantage of my lack of knowledge. He did the same with regard to slab jacking. Once [unnamed plumbing company] gave me a $3500 estimate to replace the pressure relief valve at the water meter, when I told Paul he steered me on the right path--the $600 path. He advised me when I had all the windows replaced in a triplex I owned. He did the same when I got a 40-year roof and new gutters. It is no small task painting a 3-story building and he supervised that too. Five stars aren't enough really. I've seen him manage a crew and I've seen him work alone. I probably left off some of the work Paul has done for me, he's my first choice for anything and everything to do with remodeling and new construction. It is too bad that my name and email are not shown with this recommendation because I would be happy to talk to you about the work Paul has done for me over the years. Since I'm an attorney, I can add, tongue in cheek, that I make this declaration under penalty of perjury under the laws of State of Washington . . .

Lopez Remodel Construction
4.1
from 29 reviews
  • 19 years in business
  • 46 hires on Thumbtack
John J.
Verified review

Israel showed up when we scheduled and delivered a clear bid. It was a bit higher than some others, but I felt confident in his abilities to complete the drywall, texture and painting (versus just painters). Paint work is 5 stars. Only issue was one texture location that was poorly completed. Israel was responsive and got it handled, but it took three tries. Overall, I would recommend (just perhaps with a new texture crew).

Paint by James
5.0
from 12 reviews
  • 33 years in business
  • 3 hires on Thumbtack
Mishele D.
Verified review

Not only a truly amazing airbrush artist but also one of the kindest most down to earth folks I have ever met. Also, he is knowledgeable and well rounded. You get the whole package with James Scott.

  • 19 years in business
About

We provide the following services: *Painting - interior, exterior, spray brush and roll, quick and 100% clean, apt. turns, high end, new construction, or repaints. *Handyman - Drywall, tape texture, finish work, all plumbing issues, frozen pipes, light electrical, and all home repair and remodel. *Flooring - Sub floor, underlayment, carpet vinyl, linoleum, and tile *Roofing (all types) - 3-tab 30-year and 50-year low slope, flat roofing specialist, roof repair, and leak professional (all types), available 24 hours a day and 7 days a week. *Staining - Decks, roofs, concrete, siding, fence, and all interior and exterior painting and staining. I handle anything; just give me a call. I am very professional. Pictures and excellent references of my work are available upon request. I am very skilled, and have all the tools needed!

L Lang Design

New To Thumbtack

    About

    Although I appreciate any person who has the gift of creativity, I stand out because I add jewels, different glitters & shimmer, create latex wounds for the boys, & add much detail in a short time I also do henna

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

    In other nearby areas

    Hire skilled professionals for absolutely everything.