Chula Vista, CA56 Welders near you

Where do you need the welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Chula Vista Welders

Browse these welders with great ratings from Thumbtack customers in Chula Vista.

Fabrication Solutions
5.0
from 12 reviews
  • 5 years in business
  • 25 hires on Thumbtack
Russell B.
Verified review

Any one in the San Diego County area that needs a welder for any type of project "Fabrication Solutions" is the place to contact. Wylie (owner), does an outstanding professional job. I needed a handicapped doorway ramp modified and I could not be happier with the job that Wylie did. The finished ramp looks like it was originally make at the factory. Could not be happier. Thank You Wylie, great job.

JB Welding
4.9
from 7 reviews
  • 10 years in business
  • 13 hires on Thumbtack
Gerardo D.
Verified review

James takes pride in his work and likes to get the job done right, my weld job was more difficult then i thought but he took the time to fix it right, will be back again if i have any welding to do, thanls james.

  • 2 hires on Thumbtack
Maan K.
Verified review

Denial is your best choice for any welding and iron works, he is professional, very clean and friendly does not say no to any question. And he will give you the right solution to any problem you have. Thank you

  • 1 year in business
  • 4 hires on Thumbtack
Robert G.
Verified review

Excellent job with welding repair of stainless steel clothes dryer drum.

DelTiempo Home Improvements
5.0
from 3 reviews
  • 5 years in business
  • 1 hire on Thumbtack
Larry L.
Verified review

Jaime fabricated a custom gate and hinges for me and I couldn't be happier with the results. His welds are perfect and I would recommend him for any fabrication or metal work job.

Wanda S.
Verified review

Andy has done alot of welding work for me and it has always been very good. He is responsive to my phone calls for service and I have never had any problem with the work he has done for me. I would definitely recommend him and would use him again when I need welding work done in the future.

Kline's Welding Service
5.0
from 1 review
    William B.
    Verified review

    Outstanding work. Went above and beyond the work order. Re-welded and rebuilt my broken, steel drum throne better and stronger than original factory--even repainted it to match without any extra charge! I can’t recommend highly enough taking your metalwork and welding jobs to Michael Kline.

    Berkley Welding Inc.
    5.0
    from 1 review
    • 2 years in business
    Peter D.
    Verified review

    Bill is one of the best welder I know, He always has a great attitude and gets the job done ahead of schedule and does a bang up job...

    John's Welding
    5.0
    from 1 review
    • 1 hire on Thumbtack
    Justin B.
    Verified review

    John did a great job on short notice and came out to our construction site to weld brackets to HW beams. His work is clean and detailed which is very important in the construction industry.

    J & C Mobile Welding
    4.0
    from 1 review
    • 3 years in business
    • 1 hire on Thumbtack
    About

    We are the lowest priced welders in San Diego with Top Quality work!

    • 5 years in business
    About

    We weld most everything, from metal to aluminum. If needed, we go to you and do the work. We have great prices. Call us.

    • 1 hire on Thumbtack
    About

    • 22 years in business
    • 1 hire on Thumbtack
    About

    We are a high-end fabrication and welding facility. We specialize in design and prototyping. We have a full machine shop and specialize in TIG welding aluminum, stainless, magnesium, chrome, moly, steel and cast iron.

    About

    I do underwater construction, from welding to hull cleaning. I am available for hire, 24 hours a day, 7 days a week.

    About

    I have a lot of experience in welding and fabricating, but am a great mechanic and handyman. I can help with small to big projects.

    About

    I am SMAW, FCAW and GTAW certified, with 5 years of service welding aboard navy destroyers and dry ammunition cargo ships for both repair and new construction. I have training provided by the The International Brotherhood of Boilermakers, Iron Ship Builders, Blacksmiths, Forgers and Helpers.

    About

    DV Welding has more than a decade of experience, and we can serve your residential or commercial needs.

    About

    I provide a mobile welding service that caters to all customers: homeowners, industrial and commercial businesses, construction, as well as ground-up custom fabrication.

    About

    Evan's mobile welding The welding service that comes too you *onsight welding *Repairs *fabrication *Emergency road side service

    • 3 years in business
    About

    I'm highly motivated individual to meet my costumer needs . I take pride in every job I do big or small .

    • 35 years in business
    About

    We would like our company to be your number one source for all of your fencing and welding needs. We surpass the competition, in not only Quality, but in value as well. The Word Quality is in our name for a good reason. We have been serving our community in San Diego county since 1983. We are an American Company with old fashioned American Values. Honesty and Pride in workmanship. We do what we say we will do. We look forward to serving you. Please click on the Contact us tab for google map.

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

    Actual Requests

    See other requests for welders in Chula Vista

    Need a Welding Specialist

    La Mesa, CA

    • Welding type
      Arc
    • Project type
      General welding / metalwork
    • Indoors or outdoors?
      Indoors
    • Details
      I have a fireplace screen that needs minor repair. One of the feet at the base of the screen broke off and needs to be re-welded or replaced. The broken piece measures 1' W x 3" L x 1/8" thickness

    Need Metalwork

    San Diego, CA

    • Project type
      Fabrication
    • Project location
      Indoor
    • Metal type
      Carbon steel
    • Details
      I need a fabricated truck bumper modified to fit a different vehicle. The bumper needs to be shortened on each end, and the mounting brackets need to be modified. The bumper is made from 4-inch channel steel and checker plate. Some precision welding will be necessary to patch the checker plate. All welds need to be ground flush so they don't show from the outside. Appearance of the finished product is important. I can bring the bumper and the vehicle to you. Please let me know if you are interested in doing this work.
    • $200
      Average price
    Hire skilled professionals for absolutely everything.