Arvada, CO21 Drafting Professionals near you

Where do you need the Drafting Professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Arvada Drafting Professionals

Browse these drafting services with great ratings from Thumbtack customers in Arvada.

F9 Productions Inc.
4.9
from 29 reviews
  • 9 years in business
  • 31 hires on Thumbtack
Wane F.
Verified review

I needed some CAD work done in a hurry for a prototype in the electronics industry. I was impressed with the quality of work, ease of doing business and how quickly and professionally the work was done. I confidently recommend F9 Productions for quality CAD work when you need it. Wane IG4I Marketing

Vital Architecture
4.7
from 3 reviews
  • 13 years in business
  • 3 hires on Thumbtack
Christopher F.
Verified review

Of the 7 architects I spoke with, she was the only one who showed up early and used satellite images to create CAD drawings! She. Was. Very. Prepared. She measured the house and yard with her laser measurer, reworked her draft, investigated zoning and impermeable surface limitations and brought back results that made us rethink our strategy. Half of the other architects showed up but didn't give follow-up with a quote. In the two weeks we did work together before deciding not to move forward with the project (at no fault of her own), i noticed she initiated follow-up conversations and picked up every time I called her. She also thinks like an interior designer while she's thinking of the layout. She has VISION. She was affordable, honest, forthcoming, creative, professional, personable and flexible. I just can't say enough about her. At least, let her do a consult and you'll see how passionate and dedicated she is compared to the others. She's fully licensed and comes with 2 decades of experience. We didn't move forward with the project at this time, but if we do, we'll definitely use her. Carmen may have a slight accent, but she's COMPLETELY fluent in English. Don't let that hold you back because it's her heritage and experience that sets her apart from competitors. She brings the full weight of who she is into her work. With a pen and eraser in her hand, you'll see the design you couldn't imagine and a partner to fit the deed. She did so much design and investigating without hiring her that we decided to pay her for the preliminary work she did. She was just getting started. If she'd do that much for us before getting into blueprints, I can't imagine what she's really capable of. I wish I could give her more stars. Thanks CARMEN!!!

CG Design
5.0
from 1 review
  • 19 years in business
  • 1 hire on Thumbtack
Nicole A.
Verified review

I know, you see 5 stars and you have to ask yourself if the service was really that good! I, like most, was skeptical about relying on this platform to connect me with a qualified individual to get my project done. Duane Cole proved to be highly qualified and THAT good! I needed assistance with a project that I believed to be full of complexity. Mr. Cole was professional, thorough, and prompt to reply. He was knowledgeable and insighful. He provided invaluable advice and assistance into making my project better. I am looking forward to working with Mr. Cole again in the future. -N.Alleyne

  • 1 hire on Thumbtack
Steve B.
Verified review

We had glen come in on our remodel project to do drawings and help generate some ideas. Glen is very helpful, extremely punctual, honest, and personable. He has been a big help throughout the process as revisions were needed. I would recommend that anyone needing a solid experienced draftsman work with glen.

About

I'm a professional with 20 years of CAD and design experience. I offer affordable CAD services, from simple 2D to complex 3D machine designs. I also offer laser cutting and engraving services for various materials.

About

My basic education is interior design, so I can design interior and furniture. My key technical skill are AutoCAD 2D and 3D, 3D max (beginner), Photoshop and photography. I am quick to grasp new ideas and concept and to develop innovative and creative solution problem.

About

The services I offer are as follows: * 3D rendering, modeling, etc. * Consulting * Product and engineering designs

About

I do custom CAD work. I am specializing in paper-to-CAD conversions. I also offer editing of existing drawings. I am on call 24/7.

About

Our services include: Graphic and Print Design: - Logos - Cards - Brochures - Posters - Flyers - Invitations Web Design and Development - HTML Site - Shopping Cart - Flash Site - Slideshow - Video CAD Imperial and Metric - Patent Drawings - Manufacturing Drawings - Floor Plans

  • 18 years in business
  • 1 hire on Thumbtack
About

The colors is what stands out. We provide high end rendering with crystal clear dynamic Quality. We want to satisfy our customers with unique designs that stand out from all others.

  • 20 years in business
About

Andy's Best CAD provides AutoCAD design and drafting services for HVAC, plumbing, architectural, structural steel detailing, mechanical fabrication, electrical, fire protection, landscape architectural, 3D solid modeling, CAD standards creation, and CAD conversion projects.

About

Our services include concept ideation and visualization / CAD development and prototyping / product trending / competitive benchmarking / use case scenario development / brand strategy / front-end UI wire framing / information architecture / planning and scoping / protocol development / usability testing / contextual interviews.

About

Expert 2D and 3D CAD design, with knowledge in the disciplines of structural, electrical, piping and P&ID for on-shore facilities, Working knowledge of electrical substations and wastewater facilities. Excellent organizational, communication and leadership skills while paying attention to detail, budgets, prioritize quickly and effectively, meet or beat deadlines and find and create solutions for increased efficiency, arising issues and improved work environments.

About

I can provide mechanical CAD design solutions for various types of custom machines, product development, system layouts, and part prototyping. I currently use Autodesk Inventor 3D and AutoCAD 2D. I enjoy solving problems using my 28 years of machine design experience in the Denver metro area. Let my experience help you be successful.

About

I am a versatile mechanical designer experienced in all phases of product development. I have the proven ability to conceive, design and enhance medical, computer and military products, including test and assembly fixtures. I demonstrate accuracy, attention to detail and the ability to work well in a team environment.

About

CAD-1 is an Autodesk recognized GOLD partner based our ability to meet rigorous training and certification requirements in the specialization of Architecture, Engineering & Construction and also for the Government specialization.

About

I am a creative tool, die and mechanical designer providing cost effective processes for manufacturing. I have extensive experience in the metal stamping and machining industry designing, building and maintaining complex and precision prototype and progressive dies, short run tools, fixtures and gauges. I complete designs in SolidWorks 2013, 3D assembly, BOM, 2D details.

About

We are a dynamic "mom and pop" computer-aided drafting service for the mining, oil and gas, civil, environmental, geological, surveying, and architectural fields. We have also done fire protection plans, communication plans, facility layouts and 3D presentation drawings. We use GIS information and set our maps in "real world" coordinates, transfer data between different coordinate systems and use images, such as USGS quads or aerial photos for backgrounds if needed. We use internet search engines to seek additional data or information to add to our drawings as needed by our clients. We have a large format color plotter. We are proficient in using Autocad, Autocad Map 3D, Autocad Civil 3D, and Microsoft Office. We have over 75 years combined experience. We are "picky"; we want your work to be precise and to look excellent; we do our part to make that happen!

About

My duties are as follows: * Prepare 3D as-designed and as-fabricated models based on base drawings and IFCs drawings provided by the client * Carry out laser scanning activity of the clients' facilities and generate laser models of the as-built condition * Carry out model rasta overlay * Update piping isometrics based on P&ID modifications and red line markups as approved by the client * Draft 2D Piping Isometrics and shop drawings * Carry out pipe fit and fabrication assurance * Check isometrics for dimensional consistency and conformance with P&ID * Draft and update piping general arrangement drawing * Prepare design verification, fabrication assurance and spool inspection reports * Model process lines based on piping isometrics, client's specification and ASME standard * Prepare material take off (bill of material) based on the client's piping specification * Carry out clash checks on design and fabricated models after tie-ins have been done on the facility model * Prepare laser scanning and project close-out reports * Work with project team to ensure that schedule data is accurately interpreted and that schedule changes and impacts are accurately reflected throughout the complete project cycle * Carry process walk down of proposed client's facility to ascertain scope of work and safety of work area * Work with the project and data collection specialists to generate JSA based on findings on the client's work area

About

I will get you the drawings you need in a timely manner

  • 30 years in business
About

I dont see what I do as work, it is the reflection of a vision that you my client has and wants to bring to life. I'll take the extra time, make the extra effort, to visualise what you see or want to see take shape.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How do architects work?

Architects may work for an architecture or engineering firm, they may work for a government organization, they can work for a construction company, or they may be self-employed (freelance). The U.S. Bureau of Labor Statistics explains that architects spend a large amount of their working time in the home or company office: meeting with clients; creating reports and architectural drawings; and working with other architects and engineers. When not in an office, an architect is often at the construction site either as part of the development of plans or to ensure building progress is following the blueprint.

When a client interacts with an architect, it is typically to have them design drawings for the construction of a house or a building. If you are a client who has hired a large architecture firm, there may be a team of people working on your design. But if you are working with a freelance architect or a smaller firm, one person (or a small group) will take your concept and translate it into an architectural blueprint that a builder can use to construct a house. The plans will lay out everything from the depth of the foundation to the materials to use to the type of metal to be used in the reinforcement. Once the plans have been created and handed off to the builder, the architect may remain on the project — depending on budget — and oversee progress.

How do architects charge for their services?

According to the U.S. Department of Labor, the median salary of an architect in 2016 was $76,930. This range included architects with every type of company as well as self-employed architects. Depending on the architect and whether they’re with a firm or independent, they may charge per hour or by the square foot, or they may charge a percentage of the total budget for a construction project. An hourly rate is typically used for smaller projects such as providing consultation, helping clients hone their concept before the design process begins, or drafting documents and plans. If an architect is working on an hourly basis on a larger project, there will usually be an agreed-upon cap on the number of hours they will work. For larger projects, such as new construction or total overhaul remodels, architects may charge a percentage of the total construction costs. The architect will usually set the percentage you will pay after the total cost of construction has been accounted for. Percentages can range within a firm depending on the extent of the services they’re providing. For example, a lower percentage of the total construction costs may include drafting and minimal consultation and guidance along the way, while a higher percentage could include on-site project management services with every detail attended to. Architects may also charge by the square footage of the project. The rate per square foot can vary depending on the individual’s training, the services they are providing, the complexity of the project, and other factors — such as obtaining permits. The national average cost to hire an architect is between $1,690 and $2,500.

Hire skilled professionals for absolutely everything.