Tell us what you need so we can bring you the right pros.
Receive quotes from pros who meet your needs.
Compare quotes, message pros, and hire when ready.
We had our main deck completely demolished and rebuilt; we had a second-story deck demolished, a door removed and replaced with drywall; we had a smaller lower level deck rebuilt; we had the slope of a curved bridge modified and refinished. I highly recommend working with Rufino Labra and Labra Design + Build. The most important aspect of our project was demolishing our aging cedar deck overlooking a ravine, adding 120 square feet to it, and adding deck lighting which we had never had. We also needed an unused (except by the raccoons) smaller deck area demolished, the door removed and replaced with drywall. Additionally, we had a curved bridge over a gully leading to our entrance on which we wanted the slope modified to make the tie-in to the landing gentler. Initially we were looking at Trex or Azec (both "faux" wood) for the deck but after some investigation discovered cumaru, a Brazilian hardwood similar to ipe. Rufino was the only contractor we contacted to investigate this possibility, and offered to do the deck in the cumaru for the price of Azec, and included the lighting package at no additional charge. We were also initially considering glass railing panels, but knowing that we live in a wooded area and feed the local birds, Rufino mentioned that the birds might fly into the glass and get hurt or killed, so he gave us the option of stainless steel cable, and we are so glad we opted for that! The finished deck is spectacular! The woodworking detail is amazing. Rufino also offered to install soffit lights at no charge because he knew we would love them. We do! Rufino and his crew showed up every day on time, they worked efficiently and with enormous attention to detail. He has a degree in architecture from Lawrence Tech, so in addition to being an incredibly skilled craftsman he is also artistic and talented. He was in constant communication on any changes or issues (they found carpenter ants had chewed up a lot of the old deck and advised us to call an exterminator -- we did!). They all really went above and beyond, they finished within the time Rufino had estimated despite some rainy days, and we are enormously pleased with the results. We will definitely work with Labra Design + Build in the future.
The interior designer at Script Interiors is very creative, precise, and dedicated to her work. It was a pleasure having her design my home.
Shirley was an absolute delight to work with. She is extremely responsive and available, and she is a lot of fun to work with. Most importantly, she was able to take my vision/preferences and integrate her expertise to give me a beautiful design that fit my aesthetic. I highly recommend working with Cyrus Interiors!
I am a senior-level industrial designer and design engineer, with extensive 3D CAD solid modeling (SolidWorks and AutoCAD Inventor), engineering program management and cradle to grave new product development. I have won national design awards and hold over 20 U.S. and International design and utility patents.
CAD Services / 3D CAD Services: Our company is available to perform CAD services for your project in our office or yours. These CAD services could be overflow CAD work that your company has, or for a major project where you need extra CAD operators, or we can provide complete CAD services. We can also take red line mark ups from your engineers and produce them into CAD drawings, or take your existing CAD drawings and update them to be used for as-built or record drawings. We can also take design criteria and provide complete mechanical system design and CAD services with input from the client's engineers. Building Information Modeling (BIM) Services / 3D CAD Services: Our company is available to assist you in providing 3D CAD drawings for Building Information Modeling (BIM) or construction coordination drawings for plumbing, piping, fire protection, air conditioning systems, electrical systems, structural systems, and architectural drawings. We can also provide two-dimensional (2D) and three-dimensional (3D) computer aided design and drafting (CAD) services for 2D bid sets or 3D construction coordination drawings for all disciplines: Mechanical, electrical, plumbing, fire protection, architectural, and structural. We have worked on numerous projects that have used 3D CAD files to build a 3D virtual model of hospitals, industrial buildings, schools, and universities to coordinate various trades and eliminate conflicts or collisions between the various construction trades. Many of these projects have carried large contingencies for construction costs associated with coordination between trades, schedule changes, and rework. The 3D coordination drawings significantly reduce rework costs because they build the building in a virtual world and allow resolution of the conflicts and the ability for users to view the building in 3D before the building is built. We can work with your staff to help you meet your design and/or CAD requirements for your next project. If you have any questions, please call for square foot or hourly rates. Code and Standard Consulting Services: Mr. George is active with the International Code Council which develops the International Codes. He is active with the International Association of Plumbing and Mechanical Officials (IAPMO) which produces the Uniform Plumbing Code (UPC), Uniform Mechanical Code (UMC), Uniform Solar Energy Code and the Uniform Pool, Spa, and Hot Tub Code. In 2000 through 2004, Mr. George served on the International Plumbing Code Development Committee. Since 2005 he has served on the International Residential Plumbing and Mechanical Code Committee, and from 2005 to 2009, he served as Chairman. He has also served as a member of the BOCA National Mechanical Code Interpretations Committee, ASME A112 plumbing products standard working groups, and on the American Society of Sanitary Engineering Seal Control Board, Main Product Standard Committee, and several plumbing product working groups. He has regularly attended the model code hearings and is actively involved in code and plumbing product standard development. Mr. George provides code and standard consulting services for manufacturers developing product standards or proposing code change. Forensic Investigations and Litigation Support: Mr. George has been designing plumbing and mechanical systems since 1978. Since the mid 1990s, he has been providing investigations and litigation support for plumbing, HVAC, and fire protection system failures that have resulted in property damage, personal injury, and death. His firm provides mechanical system investigations and he can prepare oral or written reports with his opinion as to what caused the system failure or injury. His company utilizes the latest tools and equipment for photographing, measuring, and recording temperatures and pressures and other instruments necessary to aid in determining how the mechanical system is performing and how it may have failed. He can provide additional research and investigation for aiding in consultations with owners, attorneys, and plaintiffs to help them decide which direction they would like to take. Mr. George also provides depositions and trial testimony. He has investigated numerous cases involving property damage, injuries, and deaths caused by mechanical system failures. Mr. George specializes in all plumbing and mechanical systems, with an expertise in domestic hot water systems and scalds and fuel gas system explosions and fires. Mr. George is very familiar with plumbing and mechanical codes and standards, and he serves on numerous plumbing product standard committees. Technical Writing: Mr. George can provide technical reports, evaluating building systems and mechanical products. Mr. George is a technical editor and writes a monthly code columnist for "Plumbing Engineer Magazine". Training Seminars: Mr. George presents plumbing, mechanical, and fuel gas seminars for the International Code Council and he gives seminars for the Uniform Plumbing and Mechanical Codes. He also provides design seminars for designing various plumbing and mechanical systems. He has taught plumbing and mechanical design classes, code review classes, and fire protection classes at Tarrant County College, Oakland Community College, Lawrence Technological University, and the University of Wisconsin. He provides seminars for various clients on an as-needed basis as well.
Architecture I design and develop blue print and schematic for mechanical, electrical and civil engineering materials, equipment and landscaping process. Building and Construction I have the knowledge and experience in building dams, roads and bridges in design, process and installation. I am familiar with operating systems such as Windows and UNIX. I am able to operate computer softwares such as Microsoft Office, Corel Draw and Vari CAD. Environmental Land Escaping and Machineries I am capable of repairing and troubleshooting electrical and mechanics of heavy equipment and machineries. I have knowledge of the process of installation and implementation of asphalt, concrete and other construction/landscaping projects.
I am a 3D digital computer artist with a large background in traditional art as well. I'm currently based out of Ann Arbor, Michigan, though I am willing to move. I've been dedicated to capturing the beauty of life through acrylic paintings, hand-drawn portraits, and digital logos.
The mission of Crutcher Studio Architects is to provide personal architectural service to clients. I pursue design solutions tailored to the specific project requirements of clients. Our expertise comes from our experience with a variety of projects types. We believe this experience allows us to bring a fresh approach to our design solutions. Crutcher Studio offers design and planning services for new construction, renovations and additions. As a licensed architect in Michigan I can provide full architectural design services.
We have backgrounds in several fields. Bill has worked in Body and Interior Design for Automotive clients Porsche, BMW, Ford Australia, Chrysler Australia, Volvo Sweden, Volvo Holland, Volvo Truck Belgium overseas, and Fisher Body, Decoma, Dodge Truck, Lear in Detroit. Anne has worked in Architectural, Process, and Maritime firms.
I am a CAD drafter and designer of sustainable design, renewable energy systems, mechanical engineering, graphics and logos. I can think outside of the box. I am a detail-oriented service provider.
I offer architectural design services, prepare construction drawings, and do residential and commercial interior design.
I have been working in this business for 23 years , I designed different projects in 16 countries around the world, commercial and residential,interior and architectural projects ,
At J & J, we create computer-aided designs to customer specifications and requirements. From complex, progressive tooling to automated machines and floor plans.
I provide architectural and graphic design services. I received my undergraduate architecture degree at U of M, and I am currently pursuing an M. Arch degree from U of M. I am not currently licensed, so by law, I can only design projects that are less than 3,500 sq ft in size.
Being a recent ID graduate I bring a fresh new look to the table from the world of design. Providing digital presentations to ensure your design is absolutely perfect
I am a freelance interior designer that loves what I do. ( I do not have a contractor or a team it is just me) I want to create spaces that are innovative yet comfortable and functional. I want to create spaces that reflects the client and makes them happy as soon as they walk through the door. This is my passion.
I am a versatile individual and can adapt easily to any challenge I encounter. I have worked on projects that involved all AEC disciplines so I know what it takes to produce a lot of drawings for a major project. I am very detail-oriented and have the work ethics to do whatever it takes to complete a project on time. I have the ability to multi-task while being organized and focused. I also have strong communication skills and have successfully completed multiple projects independently and entirely through telecommuting methods.
I take saturation and turn them into solution. I don't run from a challenge I love doing what I do.
We are a SMACNA sheet metal contractor that provides CAD-based coordination drawings for sheet metal trade. In the increasingly competitive world of mechanical contracting, one needs every advantage possible. As coordination becomes more the responsibility of the mechanical contractor, it can be a potential liability if ignored or done without proper planning and documentation.
I offer mechanical engineering design. Thank you for your interest. Contact me now to know more about my services.