Anniston, AL80 Roofing Professionals near you

Where do you need the roofing professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Anniston Roofing Professionals

Browse these roofing contractors with great ratings from Thumbtack customers in Anniston.

Blue Angels Roofing
from 10 reviews
    Erin P.
    Verified review

    After a bad storm came through, we had significant damage to our roof after several large branches scraped a large portion of shingles off and ruined a section of gutter. We were referred to Blue Angels Roofing and all I can say is that they made the entire process - from the initial quote, to the finishing details - a breeze and as painless as possible. Will absolutely use them again and recommend them to everyone I know!

    • 23 years in business
    • 1 hire on Thumbtack
    Robert I.
    Verified review

    Nelson did a great job fixing up my old detached garage. He replaced the roof, added interior siding, an interior wall, and insulation. He did a great job, communicated well, and was very reasonably priced. Highly recommend.

    • 9 years in business
    • 2 hires on Thumbtack
    Alan M.
    Verified review

    Fixed my leaking roof around the exhaust vent.

    from 5 reviews
    • 1 year in business
    • 3 hires on Thumbtack
    John B.
    Verified review

    Matthew showed up on time and did the repair needed quickly. He was professional and friendly. I would recommend that you contact Matthew with you roofing repair needs.

    Mark Cooley
    from 2 reviews
    • 28 years in business
    Cynthia B.
    Verified review

    Work quality was exceptional-very professional to work with-would highly recommend Mark for any roofing job-


    Capps & Co. Roofing specializes in any roof work, from residential to commercial, and it's covered with a million dollar general liability insurance policy and workman's company. 9 out of 10 times, we will be the lowest bidder because we are a smaller business with low over head, and we buy materials with a contractor's discount, and that's what we give you. So, call us now for a free estimate, and ask for the owner, Josh Capps. Thanks!


    We specialize in Garages,carports,RV Covers,Awnings,Metal Roofs,storage BuildingsParking lot Restripe, Pressure Washing,and Gutter Work.


    We work on roofs, bays, barrels, gutters, and decks. We do home remodeling, home addition, painting, flooring, siding, cabinets, and demolition.


    We go above and beyond. We stand behind our word!


    • 19 years in business

    We are professionals that go the extra mile to insure quality


    I give free estimates and a fair price. I do guaranteed work, and I run my jobs in a very professional matter.


    I gotta make the home owner happy.that's my job and a job worth doing is a job worth doing well done.

    • 20 years in business

    We are not just a roofing contractor!We specialize in metal roofing! To provide the best metal roof installation in the area!


    My service stands out by being honest, doing the best job that I can, and being dependable.


    We provide a full line of construction services and serve the Over the Mountain Communities, Northern Shelby County, Eastern Jefferson and St. Clair with exceptional service from design to project management to completion. We are one of the few full service companies to provide assistance with maintenance because we know that when we serve you well with a small project, you will think of us for your larger kitchen, bath, addition or remodel projects. We also have an entire division dedicated to roofing, the most important protector of your home. We have master roof installer credentials.


    We are a home-based business with references and 25 years of experience in general carpentry, maintenance, roofing, and residential and commercial construction.


    35 years of experience makes us the Professional that other professionals rely on.


    Being a third generation roofer, the thing that stands out the most is our hand nailing everything. Nail guns can be good if the roofing trade wasnt such a high turnover. Most people do not know the air setting has to change as the day warms up.


    We go above and beyond to make sure the job is correct, our motto is Quality Over All, we offer various warranties and guarantee our work. We keep the job site neat and clean, while working quickly, safely, and efficiently.


    Wilson Roofing & Contracting can handle all types of roofing jobs for residential and commercial clients. We serve all of North Alabama. We have over twenty years of experience. We do quality work at a reasonable price. All our work is guaranteed.

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    What is a standing seam metal roof?

    A standing seam metal roof may be a strong, durable, safe choice when you’re considering metal roofing installation options. A standing seam refers to the raised seam where the sheet metal roofing panels join. Traditionally, shingles and roof panels lie flush to the roof, making them more prone to rust or penetration by water at their seams. In a standing seam metal roof, the raised (or standing) seams run vertically from the roof ridge to the eaves, with no horizontal seams. In addition, the fasteners joining the metal panels together are concealed, providing even fewer opportunities for water or moisture to build up. The cost to install a standing seam metal roof will depend on the type of metal you select, the size of your roof, and the cost of roofing labor in your region. Materials will play a major role in your metal roofing installation costs. If you select standard galvanized steel, the cost per square (100 square feet) might be in the $150-$300 range, while a high-end choice such as copper or zinc could be between $1,000 and $1,500 per square. Here is one example of cost:   

    • Standing seam metal roof: $300 per square to start, including materials and labor.
      • A 30-square roof could cost $9,000 or more.

    Can a metal roof be installed over shingles?

    Metal roofs are durable, environmentally friendly, safe and budget-friendly. If you’re considering an update, metal roofing installation doesn’t have to mean completely removing your old roof. In many cases, metal roofing can be installed over your existing shingles. Research building codes in your state, as many require that after two roofs have been installed, all roofing materials must be completely removed before a third roof can be put on. This protects your home’s structural integrity and your family’s safety. Carefully read contractor reviews and choose someone with extensive experience with metal roofing installation. One concern when installing metal over shingles is that over time, condensation can build on the shingles and cause the metal to rust. This will lead to rust around the panels, making them more likely to come loose in a storm. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000. The wide price range represents different roof sizes, different types of metal, and the cost of labor in different parts of the country — and can also include the cost of removing an old shingle roof prior to installing the metal. As a line item, the average cost of removing an old roof to prepare for installing a new roof, plus adding new roof decking, costs on average about $45-$75 per square (the pro roofer’s term for 100 square feet), depending on the pitch of the roof. Always make sure you have a clearly written contract and a warranty on both the labor and the metal.


    How much does it cost for a metal roof?

    Metal roofing installation is an attractive option thanks to metal’s long lifespan, hardiness and fire-retardant properties. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000.There are different types of metal roofs, each with their own installation needs and materials costs. Roof size also affects your metal roofing installation costs, as do regional labor rates. Roof size is measured in squares; one square equals 100 square feet. Here are some examples of the average cost for a metal roof:

    • Standard metal roof: $120-$150 per square to start, including materials and labor
      • A 30-square roof (a 3,000-square-foot roof) could cost between $3,600 and $4,500 for a typical three-bedroom home.
    • Snap-Loc metal roof: $200-$225 per square to start, including materials and labor.
      • A 30-square roof could cost $6,000-$6,750.
    • Standing seam metal roof: $300 per square to start, including materials and labor.
      • A 30-square roof could cost $9,000 or more.
    • Tuff-Rib metal roof: $250-$350 per square to start, including materials and labor.
      • A 30-square roof could cost $7,500-$10,500.
    • Mid-range metal roof package, including all accessories: $300-$500 per square.
      • A 30-square roof could cost $9,000-$15,000.
    • High-end metal roof package — such as zinc or copper — and all accessories: $1,000-$1,500 per square.
      • A 30-square roof could cost $30,000-$45,000.

    Actual Requests

    See other requests for roofing professionals in Anniston

    Need a Roofer to Replace Entire Roof

    Roswell, GA

    • Project type
      Install/replace entire roof, Other (need both layers removed and new roof. ranch 1972 house with about 1958 square feet.)
    • Current roof material
      Asphalt shingles
    • Building type
      Single-level residential building
    • Details
      current roof is about 20 years old and past it's lifetime.
    • $54000
      Average price
    Hire skilled professionals for absolutely everything.