Danville, CA39 Aluminum Contractors near you

Where do you need the aluminum contractor?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Danville Aluminum Contractors

Browse these aluminum contractors with great ratings from Thumbtack customers in Danville.

Gomes Handyman
4.9
from 292 reviews
  • 15 years in business
  • 369 hires on Thumbtack
Ting P.
Verified review

Dave is more than outstanding. Not only is he professional, he can also think on this feet to resolve a very difficult door issues that we had for a long time. We live in a high end home and had 2 contractors work on the problem Each improved the situation slightly but the cause of the problem was never truly understood until Dave came along. One reputable door company even tried to sell me a new door. Initially, I was extremely wary of using someone from Thumbtack as there was no way to check credentials and bona fide references. Dave has certainly surprised us on the upside. He is cost conscious for his clients and does not recommend a more expensive solution if a cheaper one can be had. I watched Dave work the entire 2 hours he was here. He spent a great deal of time troubleshooting and then came up with a game plan that we both agreed would be ideal. He's a hard worker and an intelligent one at that. In the future, I will call on Dave to do maintenance work on our home without the slightest reservation. Ting P.

Top Pro
MyApartmentIsBetterThanYours
4.7
from 48 reviews
  • 5 years in business
  • 80 hires on Thumbtack
  • Top Pro on Thumbtack
Laura W.
Verified review

Pros: Jasper was prompt in responding, punctual, friendly, and completed the work quickly. I was impressed that he finished this project in one day; whereas other contractors seemed to indicate it was more work and more difficult. I would hire him again. Some areas he can improve: There were a couple of minor areas that were knicked on our kitchen island that I didn't notice until cleaning up. Also, I think he could have done a little better cleaning up the island- wiping down the cabinet fronts that had a light layer of dust (I did this myself). Finally, I gave him a box of stain & top coat that the previous owners left to us. He applied them but I noticed they didn't leave the counter shiny, like the finish we had before he sanded. After Jasper left, my husband realized we were missing the water sealant coat which we had in the garage. So now we are applying this coat ourselves to make the island water- proof and give it the same shine. This isn't totally Jasper's fault since I gave him the supplies but I would have liked if he would have noted that something seemed to be missing or off (or given his recommendations on what he would have stained/sealed it with to make sure the wood stayed water proof.) Overall, I'm happy with the work.

Weld Pro
4.6
from 29 reviews
  • 11 years in business
  • 45 hires on Thumbtack
Bill K.
Verified review

We are a medium sized General Contractor working large projects in the Northern California area. Barry has done work from tunnels to 100' in the air. All his work on time, within budget and excellent quality. We strongly recommend you use him for your upcoming projects large and small. Bill

Top Pro
Iron Roots
4.8
from 24 reviews
  • 1 year in business
  • 25 hires on Thumbtack
  • Top Pro on Thumbtack
Ralph A.
Verified review

Quality custom metal work!

A&R Property Maintenance
3.8
from 23 reviews
  • 5 years in business
  • 43 hires on Thumbtack
Doug G.
Verified review

Roof leak and inside drywall repair from water damage. Rosendo found and fixed a leak that two others failed to find.

Benicia Handyman Service
4.2
from 5 reviews
    Lisa K.
    Verified review

    I'm writing this to let you know how much my husband and I appreciate all your hard work on our new home.We bought a house that was essentially gutted,with no kitchen or floors and you helped developed it into a lovely home for us to reside in.Initially,we contracted with you to install flooring which you did beautifully.However,your ability to vompletenty complete cabinetry,plumbing,installation of lighting,kitchen appliances,ect.was also demonstrated.We are thrilled with the results of everything you did.We will highly recommend you to everyone we know. Cheryl Witbracht Napa Cal

    Iron Tree_Metal works
    5.0
    from 2 reviews
    • 2 hires on Thumbtack
    Susan G.
    Verified review

    James did a weld on our 50’s chrome tube chair. Very clean weld done quickly. Definitely recommend.

    Beyond Builders
    5.0
    from 1 review
      Chris H.
      Verified review

      Eric helped plan and build a functional kitchen with patience and diligence. Would absolutely call him for future needs.

      JB Handyman
      1.0
      from 1 review
      • 16 years in business
      • 3 hires on Thumbtack
      About

      We specialize in residential interior and exterior remodeling. We offer top of the line panting, kitchen cabinets installation, doors and windows, bathroom remodeling, tile, granite, shower doors, hardwood floor finishing, floor installation,interior moldings, etc. We offer affordable and competitive pricing.

      About

      I have been a man of all trades for many years. I own a few rentals, so I can do it all and at a fair price. Also, my best friend has his contractor's license if needed.

      About

      I am always punctual and am an excellent estimator. I'm very realistic about what it will take to get a project done. I will work with clients and make changes as we go along if it will improve the project.

      About

      I am a true jack of all trades with the license and insurance to support that. I am a certified welder, certified tree worker and g.c. with 15 years experience. I have many pictures of prior work and references from long term clients.

      About

      We provide complete painting service. We offer a complete service from deck painting to cement painting, house painting, staining and special coating.

      About

      We do it all. We provide handyman services right on through building permits, specs, etc. We do roofing and room additions, meet with engineers, and permit people. If we can't do your job, we probably know someone who can.

      About

      I've been in business for over 30 years. I work in the San Fransisco bay area. I am a general contractor and I perform roofing, flooring, electrical, remodel, and plumbing.

      About

      I am a highly skilled general contractor. I do full scope residential and commercial work, from rough to fine finish. I am new to the area, although I have done several projects locally in the past, mostly in the Berkley Hills. My state contractors B license in CA is not active at the present. So I will need to work around that for the present, though I do have all the skills and knowledge for any project. I am honest, hardworking and happen to be starting over in Oakland now.

      About

      Castle Painting is a San Francisco based painting contractor serving the entire Bay Area since 1989. Full range of services including residential, commercial, interior, exterior, waterproofing, kitchen cabinets, restoration, and minor repairs and construction. We are licensed, bonded and insured. We are owner-operated.

      About

      I am a CA licensed general contractor. I do residential home remodeling, bathroom and kitchen remodeling, decking, electrical work, plumbing, stairs, finish carpentry works and more.

      About

      We repair condos, apts. and homes. We do tiles, linoleums, water damage, dry rot, doors, subfloors, wall plate, plumbing and kitchens and baths.

      About

      I am a handyman/contractor serving the Bay Area. Services include: * Plumbing (gas, water, washer/dryer hook up, faucets, garbage disposals, drains, toilets, tubs, water heaters, and tankless water heaters) * Painting (crown molding, base board, and wall paper removal) * Sheetrock (repairs, tapping, mudding and texture) * Light electrical (light fixtures, ceiling fans, outlets, and light switches) * Roofing (new/repair) * Tile (marble, porcelain, ceramic and granite tile) * Construction (cabinet and countertops, door, windows, trim, interior, exterior, hauling, and demo) I specializing in bathroom and kitchen remodeling. I offer free estimates. References are available upon request.

      About

      Mr. Fix It Handyman Services is a full-service handyman service and general construction company, operating out of Oakland, CA and holds California Contractor's License # 977872. Our services include, but are not limited to drywall and painting, outdoor hardscapes and driveways, kitchen and bathroom remodels, and more. We offer free estimates to all of our customers. Year of Being Established: 1991 Number of Employees: 10 Services Offered: handyman service, kitchen remodel, bathroom remodel, driveway paving, and general construction Business Hours: - Mon: 8:00 a.m. - 5:00 p.m. - Tue: 8:00 a.m. - 5:00 p.m. - Wed: 8:00 a.m. - 5:00 p.m. - Thu: 8:00 a.m. - 5:00 p.m. - Fri: 8:00 a.m. - 5:00 p.m. - Sat: Closed - Sun: Closed

      Q & A

      Answers to commonly asked questions from the experts on Thumbtack.

      How many types of welding are there?

      Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

      • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
      • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
      • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
      • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
      • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

      How long is welding training?

      Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

      Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

      Where can I take welding classes?

      Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

      How much is welding training?

      The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

      Hire skilled professionals for absolutely everything.