Hanford, CA11 Furnace Installation Professionals near you

Where do you need the furnace installation professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Hanford Furnace Installation Professionals

Browse these furnace installers with great ratings from Thumbtack customers in Hanford.

30 Hands Repair
5.0
from 28 reviews
  • 2 years in business
  • 51 hires on Thumbtack
Geni K.
Verified review

This engaging couple was prompt, knowledgeable and professional. They did a great job servicing my heater and lighting the pilot light. I am toasty warm right now! I highly recommend them. I know I will be calling them again.

Temp Pro
4.8
from 11 reviews
  • 2 years in business
  • 17 hires on Thumbtack
Bo C.
Verified review

Recently had new Sansi wifi thermostat installed by Temp Pro. Very courteous, friendly, and professional. And very thorough. Originally wanted Google Nest, but Temp Pro gave me cheaper alternative, said sansi works just as good as Nest if I want cheaper deal. Overall, I'm very satisfied. Service and product is worth every penny. Plus he gave me some good advice on caring for AC unit. Have no negatives to say about Temp Pro

Top Pro
  • 4 years in business
  • 8 hires on Thumbtack
  • Top Pro on Thumbtack
Joanne M.
Verified review

Moses removed a swamp cooler from my roof top that I had not used since the early 1980's. He is very professional and courteous to his customers. He explained all that he was doing in layman's terms and answered all my questions. I was in customer service for 45 years and I know and recognize great service when I experience it. He is extremely helpful to his senior citizen customers. I highly recommend him to anyone looking for a professional technician to assist when their air conditioning needs or any need that is in his expertise. He gets the highest marks on all charts from me. Sincerely , Joanne A very pleased and satisfied customer

  • 20 years in business
  • 13 hires on Thumbtack
Paul C.
Verified review

Gas dryer hookup. Showed up on time, was very professional.

  • 5 hires on Thumbtack
Susan A.
Verified review

The technician came out the same day to replace a part on our furnace. He was courteous and explained everything he was doing. He made sure I understood what was needed and that I agreed. I would not hesitate to hire them again.

  • 1 hire on Thumbtack
Yeur T.
Verified review

I am pleased with the knowledge, professionalism, prompt respond, and quality service I received from Stockdale Air Conditioning. I have no problem since the installation.

Howell Air-Conditioning
5.0
from 1 review
    Greg T.
    Verified review

    Installed a new Ac and Heater. Professional, courteous and excellent service.

    About

    I have integrity and deal with customers honestly.

    • 5 years in business
    About

    Ray is a certified N.A.T.E technician. N.A.T.E technicians are know by their quality work and professional manner.

    About

    We specialize in the installation of high-efficiency air conditioners and heating systems. Repair and maintenance services are also available. There will be no money-down financing OAC. We offer factory rebates, utility company rebates, and tax credits. We also provide 10-year parts warranty on all new equipment.

    About

    I repair and replace residential furnace, A/C and duct. I also do design-build. I currently live in Fresno, California area and work in the Bay Area, California. I have 20 years of experience, and I can travel to your area. I'm clean, courteous and professional.

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    Who fixes furnaces?

    If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.

    How much will it cost me to replace my furnace?

    The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.

    How much does it cost to replace a gas furnace?

    The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.

    How much does it cost to have your furnace cleaned?

    To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:

    • Checking the vent connection pipe and chimney
    • Checking the physical integrity of the heat exchanger
    • Adjusting the controls to provide optimum air temperatures
    • Checking the combustion chamber for cracks
    • Testing for carbon monoxide (CO)
    • Adjusting the blower control and supply-air temperature
    • Cleaning and oiling the blower
    • Removing soot and corrosion from the furnace
    • Checking the fuel input and flame characteristics
    • Sealing the connections between the furnace and the main ducts

    How much will it cost me to replace my air conditioner?

    If your AC system is in need of replacement, the national average air conditioner installation costs range from $2,930 to $3,670. Costs can vary greatly depending on whether you are replacing a wall or window unit or a central air system. A central air system is connected to ductwork that runs throughout your house and pumps cooled air into your various rooms via vents and registers. A central air conditioning system is far more costly than wall or window units. Selecting a central AC system that has a high seasonal energy-efficiency ratio (SEER) will likely lower both your carbon footprint and your utility bill. The type of AC system you select, where you live in the country, and the regional costs of HVAC work, duct removal and replacement, and ductwork repairs that are needed are some of the main factors that affect the cost of new air conditioner installation. Here are some examples of average costs for installing forced-air systems.

    • Install Lennox 16 SEER single-stage AC unit: $5,743
      • Removing and disposing of the old furnace, moving and reconnecting the water heater, and installing a 3.5-ton gas furnace. The job took 18 hours of labor.
    • Installation of a new 14 SEER single-range cooling system: $4,000-$6,000
    • Installation of a new 16 SEER two-range cooling system: $6,000-$8,000
    • Installation of a new 20 SEER variable capacity cooling system: $8,000-$12,000
    Hire skilled professionals for absolutely everything.