Fence post installers near you

Fencing contractors often handle fence post installation and repairs. When looking for a professional to install or repair your fence post, make sure you complete the following steps:

• Verify their license and insurance: Look for a fencing contractor or general contractor (and perhaps even a handyman for minor repairs) with the proper licensing to comply with state regulations, especially if excavation is involved. Check that they carry liability insurance to cover any damage and workers' compensation for their crew. Requirements depend on your local area so be sure to do your research.

• Get several estimates: A quote should include labor costs, materials, post type, removal of old posts (if applicable) and estimated completion time.

• Read their reviews: Look for consistently positive feedback on quality, timeliness and communication. Red flags include frequent complaints about poor installation, delays or hidden fees.

• Look at their portfolios: Check photos of previous fence installations or repairs, paying attention to straight, secure posts and clean finishes.

• Find out if they have warranties: Ask if they offer guarantees on materials and workmanship to protect against premature wear or improper installation.

• Ask important questions: For example, how do they ensure the posts are properly set and secured? What type of concrete or anchoring method do they use? And how do they handle issues like uneven ground or existing damage?

For more tips, visit Thumbtack’s Smart Hiring page.

Fence posts come in various materials, each with advantages depending on durability, cost and aesthetics. Pros can typically install fence posts made out of:

• Wood: Pressure-treated pine is affordable but may decay over time, while cedar and redwood offer natural resistance to rot and pests.

• Metal: Galvanized steel, often used for chain-link fences, is sturdy and rust-resistant. T-posts (steel or metal) are cost-effective options for wire fencing.

• Aluminum: Lightweight, rust-resistant and commonly used for decorative or pool fencing, aluminum requires little maintenance and is ideal for humid or coastal areas.

• Concrete: Extremely durable and weather-resistant, concrete is sturdy but heavier and more challenging to install.

• Vinyl: Low-maintenance and resistant to rot and insects, vinyl is a solid choice but it may require reinforcement for stability.

• Composite: Made from wood fibers and plastic, composite offers a balance of durability and aesthetics.

• Fiberglass: Lightweight and flexible, fiberglass is commonly used for electric fences.

• Recycled plastic: This eco-friendly option is resistant to moisture, pests and rot.

Ask your pro for guidance when choosing a fence post, and consider factors like climate, fence type and your budget.

There are several factors that might impact the cost of installing fence posts, including:

• Material type: Wood, metal and vinyl fence posts vary in price. Wood posts (such as pressure-treated or cedar) are often more affordable, while metal and vinyl posts tend to cost more due to durability and lower maintenance needs.

• Post size and thickness: Larger, thicker posts provide more stability but require more materials, increasing costs. Standard 4x4 posts are more affordable than 6x6 posts, which are commonly used for heavy-duty fences.

Looking to save some money on your fence post project? These tips might help:

• Consider alternative materials: Explore options like recycled materials or locally sourced wood, which can be more affordable. For example, reclaimed wood can significantly reduce costs and is an environmentally friendly choice.

• Buy in bulk: Purchasing fence posts in bulk or as part of a fencing kit may lower the per-unit costs.

In most cases, a professional will take the following steps when installing fence posts on your property:

• Mark the layout: The professional measures and marks the fence line, ensuring proper spacing and alignment for each post based on local codes and design plans.

• Dig post holes: Using a post hole digger or auger, they dig holes to the appropriate depth and width, typically one-third the height of the post, to ensure stability.

• Set the posts: The posts are placed in the holes and adjusted to ensure they are level and evenly spaced. Some installations use gravel at the base for better drainage.

• Secure the posts: Concrete is poured around the base of each post to provide long-term stability. The mixture is leveled and allowed to set before attaching fence panels or rails. Depending on soil conditions and project needs, professionals may use alternatives like packed gravel, crushed rock or expanding foam instead of concrete.

• Check for alignment: Once the concrete has set, professionals double check that all posts are straight and at the correct height before continuing with the fence installation.

Many professionals supply and mix the concrete as part of the installation, but you should ask your pro to confirm. Some fence installers may also offer alternatives like gravel, crushed rock or expanding foam, depending on your project’s needs.

The amount of concrete needed for fence posts depends on factors like post size, hole depth and soil conditions. In most cases, professionals recommend using one to two bags (50-80 lbs each) per 3x3 post, but this can vary. It’s a good idea to discuss these ballpark numbers and more before installation begins.

Several factors impact how much concrete is required, including:

• Post size and hole depth: Larger or taller posts require deeper holes and more concrete for stability. A common rule is to dig the hole one-third the height of the post and about three times its width.

• Soil type and drainage: Loose or sandy soil may require extra concrete to keep the post secure, while dense, clay-heavy soil may need less. Gravel can be added at the base if your lawn needs better drainage.

• Fence type: Privacy fences and heavy duty gates may need additional concrete, while chain-link fences often require concrete only for end, corner and gate posts.

For an accurate estimate that aligns with your budget, contact a professional who can assess your space, soil conditions and the fence design you’re interested in.

Fencing contractors are the best choice when you want to have a fence installed on your property. While there are several types of professionals who can likely handle this service — including handymen, landscapers and general contractors — a fencing contractor has the experience to know what could cause potential problems in the long run. This might include wet spots, vegetation or other issues with the land. 

When choosing a professional to install a fence on your property, make sure they have credentials and experience.

Adding a gate to your fence can be a practical way to provide access to a yard, work area or outdoor living space while ensuring safety and privacy. Gate installation costs will vary based on the gate material you select, the size of your gate, whether you install a fence at the same time, and any special features you’d like to add. Standard opening size for a single-wide gate is 4 feet; a double-wide gate is 8 feet. A small gate may be for decoration; a double-wide gate can be mounted on a rolling caster system to allow access for cars or wide loads. Here are some examples of average fence gate installation costs:

• 4-foot, single-swing chain-link gate: $100 for materials and installation costs.
• 28-foot wheeled chain-link gate on a caster system: $800-$1,000 for materials and installation costs.
• 4-foot, single-swing wood gate: $75.
• 8-foot double-wide wood gate: $150.
• 4-foot white vinyl walk-through gate: $300–$400 for materials and installation costs.
• 8-foot, double-wide white vinyl gate: about $800 for materials and installation costs.
• White vinyl gate fence more than 8 feet wide: $1,200-$1,500 for materials and installation.
• Arched black powder-coated aluminum pool gates: $175-$200 per gate.

Help define your property line, protect your home and yard, and boost your curb appeal with a new wood fence. The national average for wood fence installation cost is $3,250. Wood fence installation costs will vary based on your geographic location, the type of wood you select, the height and style of wood fence you desire, and the condition of your property. Pressure-treated pine is a common and attractive choice that is usually resilient against rot and bugs. Cedar is another budget-friendly option that, although more expensive than pressure-treated pine, can be more affordable than redwood or teak. A wood fence requires maintenance to ensure its long-term health and beauty, so keep future staining and painting costs in mind when you’re calculating fence installation costs. Here are some examples of how height and material affect the approximate cost of wood fences:

• 6-foot-high, pressure-treated pine fence: $15-$17 per linear foot.
• 4-foot-high, pressure-treated pine fence: $13-$20 per linear foot.
• Cedar fence: $18-$25 per linear foot.
• 6-foot-high, double-sided (meaning both sides are uniform), pressure-treated pine fence with 6x6 posts: $25 per linear foot.
• 12-foot-high, pressure-treated pine fence with custom detailing: $75 per linear foot.
• 6-foot-high, pressure-treated pine fence with a custom lattice top: $30-$50 per linear foot.

The cheapest type of fence to install is (usually) a chain-link fence. Averaging between $7 and $12 per linear foot, this type of fencing is strong and secure and allows homeowners to maintain visibility while adding protection to their property. Chain-link fences are constructed from steel coated in aluminum, vinyl or zinc for weather resistance. 

You can get a more accurate cost estimate for your chain-link fence by contacting professionals who specialize in installing these fences. 

Read our cost guide on fence installation costs to see prices for other types of fences.

Chain-link fence is one of the most affordable options for adding safety and value to your home or business. The national average chain-link fence installation cost is $2,750. Chain-link fences are relatively simple for the pros to install; a fence of less than 150 linear feet can often be put up in under one day. A good rule of thumb is to add an additional workday for each additional 100 linear feet of fence to be installed.

Chain-link fence installation costs are affected by the fluctuating cost of steel, regional labor rates, the height of fence you select, and the features you select, such as a powder-coated finish. The industry standard is galvanized steel, which is rust- and corrosion-resistant. Galvanized chain-link fence installation cost, including labor and materials, is typically $12 per linear foot. For a more contemporary and elegant option, black powder-coated galvanized chain-link fence might cost approximately $15 per linear foot on average, including materials and labor. For industrial sites or businesses, 10-foot-high galvanized chain-link fences may provide additional security, but also have an added cost. A 10-foot-high chain-link fence could cost $17-$18 per linear foot, including labor and materials.