Starkville, MS12 Metal Roofing Installation Professionals near you

Where do you need the metal roofing installation professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Starkville Metal Roofing Installation Professionals

Browse these metal roofing installers with great ratings from Thumbtack customers in Starkville.

Redwood Roofing, LLC
5.0
from 10 reviews
  • 17 years in business
Sylvia C.
Verified review

Redwood Roofing reshingled and did some maintenance around the chimney, sky-light and eaves. The work was excellent, high-quality and extremely prompt. We were especially thrilled how well they performed clean-up and carry-off. The rates were very reasonable and the estimate was right on target. It was definitely a 5-star job! Roger and Sylvia Collins, Columbus, Mississippi

Arrow Construction Llc.
5.0
from 1 review
  • 3 years in business
  • 2 hires on Thumbtack
Pauline C.
Verified review

Firstly Mr Dauber is a very easy person to work with. He listens to your requirements and provides straight forward solutions. We received his quote within the day and accepted it as being very reasonable. He, with a coworker, arrived early and worked hard the entire time they were on site. They dismantled an old retaining wall, rebuilt the retaining wall using quality materials, installed a double drainage system and assisted us in clearing up another area of the yard just to be helpful. The whole job took just under 2 weeks. They maintained a clean work area and were very accomodating to our needs and schedule. I highly recommend Mr Dauber.

About

No job too big or too small. Minimum cost on estimates will knock off estimate when we do the job. We hand nail or air nail and we install medal, rubber, shingles and roofs.

  • 10 years in business
About

We are honest and fair

About

I do everything, from remodeling to construction. I paint inside and outside, do vinyl siding, shingle and metal roofs, decks, room additions, carport, small buildings, and concrete. I do carpet vinyl tile, sheetrocking, blow in acoustic and stomp ceiling, and wire appliances.

  • 9 years in business
About

Timely response, great clean up, warrantied work, neat and clean work, and special attention to problem areas of your roof like vallies, chimneys, skylights, dormers, etc...

  • 3 years in business
About

A roofing company that takes the time to make sure the job is done right and homeowners satified..

About

My name is Gerald Collins. I am the owner and operator of Gerald Collins Roofing. I have been in the roofing business for over 25 years. I'll bring more than 50 years' worth of experience to the job. I do both metal and all types of shingles. My motto is the job is never finished until the customer is satisfied. I am very flexible. If you like, I will provide the material and labor. If you like, you can provide the material, and I will do the labor. If you hire me to provide you with a new roof, you will receive a quality job by a professional crew.

  • 5 years in business
About

I take the extra time to do it like it was my Owen and not just a nother job

About

Lindsey Roofing LLC is a locally-owned and -operated company providing the residents of Columbus, Mississippi area with a complete range of professional roofing and general contracting services for years. No job is too big or too small, as we are seasoned experts that offer a fully comprehensive range of services. Some of our specialties include roofing installation, re-roofing, seamless gutter installation, soffit, tear off and siding installation to name a few! Products: All types of commercial and residential roofing, trim, flashing, utter, downspouts, metal panel, standing seam metal, metal tile, clay tile, EPDM, rubber, TPO, modified shingle, and water proofing. Services: Commercial roof maintenance, roofing installation and repair, re-roofing, seamless gutter installation and replacement, seamless gutter installation and replacement, pipe boot replacement, ridge vent ventilation, waterproofing, ice and water shield insulation, soffit installation,tear offs,trim services,siding installation,consultations, leaks, repair and restoration, sheet metal fabrication, roof replacement, installations, new roof estimates, residential services, repairs, fabrication, estimates, and commercial services. Specialties: Shingle roofs, asphalt roofing, copper roofing and fab work, slate roofs, weather damage, shakes, composite roofing, tar and gravel, re-roofing, rubber EPDM, roof tear off and disposal. Brands: Tamko, Gaf Master, Mulehide, and Englert

About

We do roofing of any type. We are professionals who are making sure your roof is sealed, and we put on the best as much as possible while keeping your yard spotless.

  • 30 years in business
About

Roofing contractors usually charge too much! We always treat customers right by giving them the lowest price we possibly can. We keep our overhead LOW and pass the savings on to YOU! Pretty cool huh?

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

What is a standing seam metal roof?

A standing seam metal roof may be a strong, durable, safe choice when you’re considering metal roofing installation options. A standing seam refers to the raised seam where the sheet metal roofing panels join. Traditionally, shingles and roof panels lie flush to the roof, making them more prone to rust or penetration by water at their seams. In a standing seam metal roof, the raised (or standing) seams run vertically from the roof ridge to the eaves, with no horizontal seams. In addition, the fasteners joining the metal panels together are concealed, providing even fewer opportunities for water or moisture to build up. The cost to install a standing seam metal roof will depend on the type of metal you select, the size of your roof, and the cost of roofing labor in your region. Materials will play a major role in your metal roofing installation costs. If you select standard galvanized steel, the cost per square (100 square feet) might be in the $150-$300 range, while a high-end choice such as copper or zinc could be between $1,000 and $1,500 per square. Here is one example of cost:   

  • Standing seam metal roof: $300 per square to start, including materials and labor.
    • A 30-square roof could cost $9,000 or more.

Can a metal roof be installed over shingles?

Metal roofs are durable, environmentally friendly, safe and budget-friendly. If you’re considering an update, metal roofing installation doesn’t have to mean completely removing your old roof. In many cases, metal roofing can be installed over your existing shingles. Research building codes in your state, as many require that after two roofs have been installed, all roofing materials must be completely removed before a third roof can be put on. This protects your home’s structural integrity and your family’s safety. Carefully read contractor reviews and choose someone with extensive experience with metal roofing installation. One concern when installing metal over shingles is that over time, condensation can build on the shingles and cause the metal to rust. This will lead to rust around the panels, making them more likely to come loose in a storm. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000. The wide price range represents different roof sizes, different types of metal, and the cost of labor in different parts of the country — and can also include the cost of removing an old shingle roof prior to installing the metal. As a line item, the average cost of removing an old roof to prepare for installing a new roof, plus adding new roof decking, costs on average about $45-$75 per square (the pro roofer’s term for 100 square feet), depending on the pitch of the roof. Always make sure you have a clearly written contract and a warranty on both the labor and the metal.

 

How much does it cost for a metal roof?

Metal roofing installation is an attractive option thanks to metal’s long lifespan, hardiness and fire-retardant properties. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000.There are different types of metal roofs, each with their own installation needs and materials costs. Roof size also affects your metal roofing installation costs, as do regional labor rates. Roof size is measured in squares; one square equals 100 square feet. Here are some examples of the average cost for a metal roof:

  • Standard metal roof: $120-$150 per square to start, including materials and labor
    • A 30-square roof (a 3,000-square-foot roof) could cost between $3,600 and $4,500 for a typical three-bedroom home.
  • Snap-Loc metal roof: $200-$225 per square to start, including materials and labor.
    • A 30-square roof could cost $6,000-$6,750.
  • Standing seam metal roof: $300 per square to start, including materials and labor.
    • A 30-square roof could cost $9,000 or more.
  • Tuff-Rib metal roof: $250-$350 per square to start, including materials and labor.
    • A 30-square roof could cost $7,500-$10,500.
  • Mid-range metal roof package, including all accessories: $300-$500 per square.
    • A 30-square roof could cost $9,000-$15,000.
  • High-end metal roof package — such as zinc or copper — and all accessories: $1,000-$1,500 per square.
    • A 30-square roof could cost $30,000-$45,000.
Hire skilled professionals for absolutely everything.