There have been several reported cases of mold in Houston housing units, according to the 2017 American Housing Survey. Out of the reported cases, nearly half of mold growth occurred in the bathrooms, while more than one-fifth of cases took place in the living room.
Houston has a humid, subtropical climate. Because mold in homes has a tendency to grow in moisture-rich environments, pay close attention to mold in your home when the city is experiencing high levels of humidity. Once you’ve identified mold in your home — whether in your attic, basement, bathrooms, crawlspaces, drywall, etc. — reach out to the top mold remediation companies in Houston.
You can prevent mold growth by fixing leaky pipes or roof leaks as soon as possible to reduce the risk of moisture. Also, clean up water spills quickly. The Houston Department of Health and Human Services recommends searching for moisture in your kitchen and bathrooms. Mold has a musty odor and can collect behind the carpet, furniture or stored items in closets and basements, as well.
Contact Houston’s top mold remediation experts if you think there’s a mold problem in your home.
You can find general contractors in Houston by searching online. Read reviews from past customers and look for photos of completed projects. You may also find information about their credentials on their profiles, or you can try verifying a general contractor’s license by visiting the Texas Department of Licensing and Regulation website.
Before you hire a contractor, ask for a cost estimate from several pros in Houston. Hiring a contractor to work on your home is an important decision, so feel free to take your time and compare quotes from a few pros.
What’s the best way to set up a consultation or an appointment with a general contractor during the COVID-19 pandemic?
To set up a consultation or appointment with a general contractor during the COVID-19 pandemic, start by performing an online search for local professionals near you.
Message the contractor, and see if they are willing to set up a video consultation call instead of an in-person site visit. With video chat, the contractor may be able to assess the scale of the project, give you better information on what needs to be done and perhaps provide an estimate. Be sure to discuss virtual payments, as well as general strategies for staying safe.
Mold testing can help identify a mold infestation in your home or business. The EPA explains that if you have a visible mold problem, in most cases sampling and testing is unnecessary. However, if you have unexplained and potential mold-related illness or can smell mold in your house, mold inspection costs may be a good investment.
To avoid unscrupulous testers, the EPA recommends working with a testing agency that adheres to the analytical methods laid out by professional organizations such as the American Industrial Hygiene Association or the American Conference of Governmental Industrial Hygienists
If you suspect there's mold growing in your home, contact the best mold removal experts to get it tested.
How often you should clean your air ducts depends on your situation. If you or someone in the home has asthma or is acutely allergic to certain airborne materials or pollen, regular duct cleaning may be helpful. The Environmental Protection Agency doesn’t have an official position on the necessity of air duct cleaning unless the ducts have been contaminated by rodents, insects or mold, or you are aware of particles blowing out through the vents. The EPA recommends you have your air ducts cleaned on an as-needed basis. The National Air Duct Cleaners Association (NADCA) suggests having air ducts cleaned every three to five years.
Be cautious with companies that offer “whole house air duct cleaning,” urges the NADCA. The company may be using unscrupulous tactics to upsell you once they get started. Before any work begins, always clarify in writing what the job entails and what the cost will be. To protect yourself against fraud, read customer reviews and verify that your HVAC cleaning service has applicable licenses and certifications.
Mold remediation is the process of identifying and removing unhealthy levels of mold that have colonized in a home, office, school or other building. Over time, if untreated, mold can destroy a home by breaking down cellulose-based materials (like wood or ceiling tiles) and causing a slow and messy decay. In the shorter term, a mold infestation can cause severe health problems.
If mold has been positively identified in your house, either by visual examination or through mold testing, remediation can safely remove it. Properly trained and equipped professionals use specialized equipment (like vacuums and air scrubbers with HEPA filters) to keep mold spores contained while they remove contaminated materials and treat infested areas with antimicrobial spray.
Here's an example of the steps involved in professional mold remediation:
- Contain work area and apply negative air pressure HEPA air purifiers to prevent cross-contamination. If spores spread, the colonies can easily regrow elsewhere in your home.
- Mist an EPA-registered antimicrobial to suspend and kill mold spores.
- Remove affected building surfaces.
- Bag and dispose of contaminated materials properly.
- Treat cavities/underlayment and dehumidify.
- Abrasively remove dead loose mold.
- Apply EPA-registered protective sealer.
- Perform clearance testing.
- Remove containment materials.
A key component to a successful mold remediation after eliminating the mold is ensuring that the water source that caused the mold infestation is also resolved.
If you think there's mold in your home, contact the best mold remediation experts immediately.
To find out whether a general contractor is considered essential in your area during the current coronavirus pandemic, visit your city or state’s government website, which will have information on essential services.
Find information on national recommendations by visiting CISA’s Identifying Critical Infrastructure During COVID-19 webpage. However, not all jurisdictions follow CISA’s definitions of critical infrastructure.
Hiring a mold remediation professional is usually the best strategy to get rid of unhealthy levels of mold in your home or office. If you’re not comfortable working with mold or the area is larger than 10 square feet (3 feet by 3 feet), it is highly recommended to hire a mold remediation professional to resolve the problem.
However, if you’re DIY-savvy, don’t have any health risks, and are not freaked out by mold, the EPA gives homeowners the greenlight to clean mold areas that are less than 10 square feet. Here are some EPA-recommended DIY cleaning tips:
- Fix plumbing leaks and other water problems as soon as possible. Dry all items completely.
- Scrub mold off hard surfaces with detergent and water, and dry completely.
- Throw away absorbent or porous materials (like ceiling tiles and carpet) if they become moldy.
- Avoid exposing yourself or others to mold.
- Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel.
- If you are unsure about how to clean an item (art, fine furniture, etc.) consult a reputable specialist affiliated with a professional organization in their field.
You can never completely remove mold from your house; a small number of mold spores will always exist indoors and are a natural and helpful part of our world. However, if water or moisture is left unchecked inside your home and mold begins to colonize, it can pose a serious health risk. Mold remediation can quickly and safely remove a mold infestation from your home or office. Depending on the size of your problem, mold remediation might take anywhere from one to seven days (or more) to wipe out the major sources of mold in your home.
Mold growths (colonies) can establish within 24-48 hours, so it is important to act immediately if you have a water spill or leak — especially if you live in a hot or humid climate. If you are past the point of DIY and need professional help, mold remediation teams will come to your location, assess the extent of the mold problem, identify and rectify all water leaks and sources of dampness, identify all mold sources (both visible and hidden), use specialized equipment to contain and prevent migration of mold spores, safely remove contaminated materials, treat infested areas with approved antimicrobial sprays, dehumidify and dry the appropriate areas, and seal areas as needed.