Plano, TX15 sheet metal fabrication services near you

Where do you need the sheet metal fabrication service?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Plano Sheet Metal Fabrication Services

Browse these sheet metal fabrication services with great ratings from Thumbtack customers in Plano.

  • 19 years in business
  • 123 hires on Thumbtack
Keith S.
Verified review

Outstanding service and terrific work. I actually requested quotes from other welders before finding Bruce and was giving a price I thought was too high for the work I needed done. I even had a couple welders tell me they did not want the work. Within 15 minutes if requesting a quote on Thumbtack, Bruce gave me a call with a great price. Took the material to the shop and Bruce said it was no problem, would be about 48 hours. Got a call 2 hours later saying it was done. Not only did the pieces look great, Bruce painted them and added finishing touches. Even attempted to charge me less but I had no problem paying more because it was quality work. I highly recommend Bruce for any welding or fabrication needs.

Top Pro
D&M construction
from 55 reviews
  • 6 years in business
  • 58 hires on Thumbtack
  • Top Pro on Thumbtack
Erik R.
Verified review

Mike did an incredible job with a table base that he fabricated and powder coated. It will make an incredible addition to our space and I've already got Mike working on a second project. Highly recommend!

Ascot Fence
from 52 reviews
  • 9 years in business
  • 73 hires on Thumbtack
James P.
Verified review

Whereas Ascot did a great job on the fence, they also were to install box covers over the metal poles to give a polished finish to the unfinished side. This being said, his crew does not understand how to properly install box covers therefore leaving me with a poorly installed bunch of covers! This was discussed with Andre and he agreed the quality was lacking - only reason I didn't rate him lower was his agreeing that his installers need training on box covers as they do not do this very often. The fence itself is well built, with the exception of a couple places where the boards were not raised above ground level leaving the bottom to be placed on the ground therefore leaving the boards to early rot! Price was very good (lowest of 6 bids) and Andre is more than willing to correct deficiencies- only negative is if you are not on site checking progress of work, you may have some minor issues as I had! Would recommend.

  • 10 years in business
  • 93 hires on Thumbtack
Steve S.
Verified review

Awesome! Communicated extremely well. Gave great advice on the fabrication of multiple items. I could not be happier w the end result. Highly recommended!

  • 19 years in business
  • 36 hires on Thumbtack
Verified review

Just picked up my sheet metal trim. Today is Wednesday, I ordered it Saturday. I've been in the home building and remodel business in the Dallas area for some 40 years. the trim was exactly what I ordered, the service was fast and the cost was more than reasonable. I did not know of the company until I found then on the web but I' m sure glad I did. Prompt, professional and the price was reasonable. Need I say more.

Bar Z Welding and Repair
from 22 reviews
  • 3 years in business
  • 28 hires on Thumbtack
Gloria H.
Verified review

Did the impossible, working with galvanized aluminum underneath my 08 mini cooper! A piece broke off the housing that holds the slave cylinder in place, wasn't very big piece but was tedious job. My car was back on the road 30 min after he was done, no problems at all. Very happy customer

Dsol welding services
from 17 reviews
  • 2 years in business
  • 17 hires on Thumbtack
Luke W.
Verified review

David custom crafted me a pull-up rig for my home garage gym. He took the time and care to use the exact specifications of one I had seen on the internet and even helped me in making sure it would fit in my garage space and stud mounting pattern when mounted. I paid a fraction of the price of what I would have paid online for a similar pull-up rig and, in my opinion, my rig is sturdier because the entire piece is welded. Best of all, he did it in only a couple of days, so I didn't have to wait on one to be shipped, if I had bought online. He even assisted me in mounting it upon delivery. I wouldn't hesitate to use David again for any custom garage gym needs or other custom metal fabrication pieces.

Patterson's Portable Welding
from 16 reviews
  • 15 hires on Thumbtack
Rajya B.
Verified review

Mr. Patterson did an excellent job welding the metal door to have a Samsung smart lock placed. He's a perfectionist and his job is very neat and precise. He had a great attitude too. We enjoyed having him work for us.

Goldermann Welding
from 15 reviews
  • 5 years in business
  • 20 hires on Thumbtack
Aisha L.
Verified review

Steve did an awesome job on my clients fireplace surround!! He was reasonably priced (as everyone else wanted 1,000 plus) prompt, honest, and he even delivered the item. He will be my go to guy for and metal fabrication needs my design clients may have in the future!! Thanks again Steve

JR Metal Fabrications
from 7 reviews
  • 10 hires on Thumbtack
Don M.
Verified review

Did a good job cutting the metal piece I needed.

JR Metal Fabrication
from 3 reviews
  • 3 hires on Thumbtack
Bobby W.
Verified review


Home Grown Metal Fab
from 3 reviews
  • 4 years in business
Christopher L.
Verified review

I had Nathan weld up a broken door hinge on my jeep door he did a good job door closes just fine and the pin striping lines up like it was from the factory

Gainesville Sheet Metal

New To Thumbtack


    Since 1981 we have been offering comprehensive metal fabrication to Gainesville, Texas and surrounding areas. With 30+ years of experience, we have worked on all types of projects and worked with all types of businesses. At GSM we take pride in every single job that we do, no matter how small or big. We have been in business for over three decades because of our commitment to customer service and workmanship. We help our customers take the designs they have in their heads and make them a reality.

    Overtime Gutters

    New To Thumbtack


      We offer seamless rain gutters, with lifetime warranty. Overtime Gutters is your proven partner in the gutter, custom sheet metal, and painting business, with over 40 years of installation experience. We are properly insured. We provide free estimates, 5-year labor warranty, and a lifetime product warranty. We provide fast turnarounds on needed estimates and professional representation during install.


      I'm fabricating metal, from big to small and welding/fitting stainless, carbon, and aluminum, from thin gauge to heavy plate, industrial pressure vessel and just some pretty stainless handrail.

      Q & A

      Answers to commonly asked questions from the experts on Thumbtack.

      How long is welding training?

      Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

      Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

      How much is welding training?

      The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

      How many types of welding are there?

      Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

      • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
      • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
      • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
      • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
      • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

      Where can I take welding classes?

      Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

      Hire skilled professionals for absolutely everything.