Find a carpenter in your area

Find a carpenter in your area

Find a carpenter in your area

Confirm your location to see quality pros near you.

Zip code

Carpenters near Golden Valley, MN

Top pros for your project

These pros consistently receive high praise in customer reviews.These popular pros are highly sought after for their quality and expertise.These pros recognize that your time is important, and are the fastest to respond to requests.These highly recommended pros are experts, ready to help with your project.

These pros consistently receive high praise in customer reviews.These popular pros are highly sought after for their quality and expertise.These pros recognize that your time is important, and are the fastest to respond to requests.These highly recommended pros are experts, ready to help with your project.

Avatar for Handyman Hallway
Avatar for Handyman Hallway
4.
Handyman Hallway
4.
Handyman Hallway

Great 4.8

(44)

Great 4.8

(44)

General Carpentry

  • 88 hires on Thumbtack
  • Serves Golden Valley, MN
  • 88 hires on Thumbtack
  • Serves Golden Valley, MN
De S. says, "In Sept 2025, over course 1 & 1/2 days, Roger worked about 5 hours total on 1 project: to shore up the section of door jam to make more sturdy so that when I when I slot the deadbolt into door jam section it would feel more like solid door protection. At project end, I noticed a slight glitch he'd created with deadbolt not aligning flush into the slot, but he instructed me to just push on the door so the deadbolt could more easily slot into his newly finished door jam section. Now, 2 months later (early Nov) , the temps have dropped significantly and not even his suggestion that I push on the door t help deadbolt slot helps. I cannot get the deadbolt to even enter into the jam slot. No amount of pushing nor pulling on the door will help to align the deadbolt with the door jam slot. 5 days ago, I reached out to Roger about the development. He immediately responded by typing speculative nonsense that: 1) this development must be a new issue (in other words not related to the project he did & concluded with the slight glitch) or 2) there must be debris in the slot, and 3) he ONLY DID WHAT I HAD DIRECTED HIM to do. In his typed reply, it never occurred to Roger that spewing idle speculation from his keyboard is not a solution to the issue, demonstrates a lack of professionalism, and that I have NEVER instructed him on how or where to reattach the metal plate position on his door jam (into which the deadbolt should slot). [If I had known how to shore up my door jam, I would have done it myself and never hired someone to do it]. In his typed reply, he said he was so busy that I'd have to wait about 5 days until he could arrive to look at & fix the issue. Of course, this means I still cannot use my door's deadbolt until it is addressed. It is now day 5, about 1:30pm, and Roger has not even bothered to give me any ETA on his expected arrival time, nor even bothered to respond to my message sent yesterday to confirm he will still even be arriving today. I even called and left him a voicemail message this morning asking for a confirmation he'll still arrive today and an ETA. No response. In the interim, I had a neighbor (engineer) come look at the issue. Neighbor quickly identified the problem. Neighbor said when Roger had done the door jam project in Sept he positioned & screwed in the metal frame on door jam a little too far R (which, apparently, is why Roger had instructed me at project end to push on the door to help deadbolt slot into that section. Neighbor said now that the temps have dropped, the alignment disconnect is exacerbated as the deadbolt is now only striking the metal frame around the slot and not going into the slot. Neighbor said the solution is to have the metal frame unscrewed, physically moved to the L so the deadbolt no longer strikes the metal frame around slot but, instead, creates a correct alignment with the slot so the deadbolt enters the slot. Neighbor added that putty will need to be applied to fill in holes of current wrong screw placement. Would you believe I had also tipped Roger for his earlier work at project end (since he did not finish project in only a few hours as he had anticipated - he was also working me in around other folks projects too, causing him to be delayed in returning to complete my project. Please know that Roger never arrived when he said he would, and only after he failed to arrive on time, did he then leave me updated ETA and still never arrived when he though on the updated ETA. I tipped Roger in Sept because I was just appreciative to have him return and finish the project that next day and he seemed kind. Now, I wish he had articulated then why the glitch was happening (his incorrect alignment of the metal slot frame with the deadbolt, rather than just instructing me to push on the door to insert deadbolt. I wish now that he had bothered to tell me the problem would become much worse when the temps drop). Ladies, we can do better. While handymen hang out shingles to go into business, please recognize that not all are equipped with a threshold level of professionalism nor know how. This does not make Roger a bad person. I wish for him self growth, lots of it. When we are paying are money, we customers should have a reasonable expectation of receiving courteousness, appropriate level of communication about the project and any glitches they should know they have caused. I do not need them to be perfect but when they make a mistake, to communicate it to the homeowner and try to fix it."See more
De S. says, "In Sept 2025, over course 1 & 1/2 days, Roger worked about 5 hours total on 1 project: to shore up the section of door jam to make more sturdy so that when I when I slot the deadbolt into door jam section it would feel more like solid door protection. At project end, I noticed a slight glitch he'd created with deadbolt not aligning flush into the slot, but he instructed me to just push on the door so the deadbolt could more easily slot into his newly finished door jam section. Now, 2 months later (early Nov) , the temps have dropped significantly and not even his suggestion that I push on the door t help deadbolt slot helps. I cannot get the deadbolt to even enter into the jam slot. No amount of pushing nor pulling on the door will help to align the deadbolt with the door jam slot. 5 days ago, I reached out to Roger about the development. He immediately responded by typing speculative nonsense that: 1) this development must be a new issue (in other words not related to the project he did & concluded with the slight glitch) or 2) there must be debris in the slot, and 3) he ONLY DID WHAT I HAD DIRECTED HIM to do. In his typed reply, it never occurred to Roger that spewing idle speculation from his keyboard is not a solution to the issue, demonstrates a lack of professionalism, and that I have NEVER instructed him on how or where to reattach the metal plate position on his door jam (into which the deadbolt should slot). [If I had known how to shore up my door jam, I would have done it myself and never hired someone to do it]. In his typed reply, he said he was so busy that I'd have to wait about 5 days until he could arrive to look at & fix the issue. Of course, this means I still cannot use my door's deadbolt until it is addressed. It is now day 5, about 1:30pm, and Roger has not even bothered to give me any ETA on his expected arrival time, nor even bothered to respond to my message sent yesterday to confirm he will still even be arriving today. I even called and left him a voicemail message this morning asking for a confirmation he'll still arrive today and an ETA. No response. In the interim, I had a neighbor (engineer) come look at the issue. Neighbor quickly identified the problem. Neighbor said when Roger had done the door jam project in Sept he positioned & screwed in the metal frame on door jam a little too far R (which, apparently, is why Roger had instructed me at project end to push on the door to help deadbolt slot into that section. Neighbor said now that the temps have dropped, the alignment disconnect is exacerbated as the deadbolt is now only striking the metal frame around the slot and not going into the slot. Neighbor said the solution is to have the metal frame unscrewed, physically moved to the L so the deadbolt no longer strikes the metal frame around slot but, instead, creates a correct alignment with the slot so the deadbolt enters the slot. Neighbor added that putty will need to be applied to fill in holes of current wrong screw placement. Would you believe I had also tipped Roger for his earlier work at project end (since he did not finish project in only a few hours as he had anticipated - he was also working me in around other folks projects too, causing him to be delayed in returning to complete my project. Please know that Roger never arrived when he said he would, and only after he failed to arrive on time, did he then leave me updated ETA and still never arrived when he though on the updated ETA. I tipped Roger in Sept because I was just appreciative to have him return and finish the project that next day and he seemed kind. Now, I wish he had articulated then why the glitch was happening (his incorrect alignment of the metal slot frame with the deadbolt, rather than just instructing me to push on the door to insert deadbolt. I wish now that he had bothered to tell me the problem would become much worse when the temps drop). Ladies, we can do better. While handymen hang out shingles to go into business, please recognize that not all are equipped with a threshold level of professionalism nor know how. This does not make Roger a bad person. I wish for him self growth, lots of it. When we are paying are money, we customers should have a reasonable expectation of receiving courteousness, appropriate level of communication about the project and any glitches they should know they have caused. I do not need them to be perfect but when they make a mistake, to communicate it to the homeowner and try to fix it."

FAQs

Answers to commonly asked questions from the experts on Thumbtack.

In any kitchen, the cabinets are the main focus, so you want to make sure new or replacement cabinets are installed correctly. A professional carpenter can properly, securely mount new cabinets to the wall; the national average cost for this service is $7,725, although the cost varies widely depending on the type of cabinets, their material and their size, and the accessories you add. A typical fee is $70 per linear foot to remove existing cabinets and assemble and install new ones; the cost is less if you do the demolition and removal yourself. Stock cabinets are the least expensive to have installed, ranging from $75 to $400 each; semi-custom cabinets range from $150 to $900 each; and custom cabinets cost from $500 to $1,400 each. Wood cabinets are more expensive than those made from plywood or medium-density fiberboard (MDF) and finished with a laminate. Wood cabinets range in cost from $80 to $160 per linear foot. Laminate-finished cabinets cost $35 to $75 per linear foot, on average.

Custom cabinets can be built for any room, including bedroom closets and built-in armoires. Measured carefully and built precisely, custom cabinetry can increase storage and beautify any room. The national average for building custom cabinets ranges from $500 to $1,200 per linear foot. The cost is highly variable because there are so many styles, colors, glazes and other options. In general, the linear footage of the cabinets, the materials used to build them, and the cost of the labor will determine the cost. Solid wood costs more than plywood and wood veneer, and costs vary among different types of wood; maple and cherry cabinets are more expensive than pine. Glass-front cabinets can cost more, as can decorative hinges, handles and door pulls, which can cost $2-$45 each; choose carefully to stay within your budget and pull off the exact look you’re going for. Some carpenters also charge for installation, on average $100 per cabinet box. Additional molding and trim, such as crown molding at the ceiling, cost an average of $70 per 8-foot section, and adding finished ends to exposed cabinets averages $100-$200.

In general, home service providers such as electricians, plumbers and contractors are professionals who don’t expect tips. They expect to do a job for you for the specific price they quoted. Of course, they may appreciate a tip for a job particularly well done or for which they’ve gone beyond what’s normally expected, such as completing the project early or under budget. Even better than a tip, it’s always appropriate to leave a positive review online after a good experience.

Carpenters are trained to work with wood. That means that any part of your home that is built of wood is very likely to involve a carpenter. Framing carpenters will put up the wood that makes up the bones of your home. If you’re having a wood floor installed, it may be done by a carpenter — although being a carpenter is not a requirement to install flooring. Trim, baseboards, wainscoting and any other detail work is typically installed by a finish carpenter. The wood boxes of custom cabinets will be built and installed by a carpenter.

Although all of these components in your new or remodeled home are built by carpenters who specialize in building things with wood, a general contractor typically oversees construction of the entire house. If the general contractor is also a carpenter skilled in all these areas, they may well construct your entire home. More often, the general contractor subcontracts out the various building stages to different individuals, including carpenters.

On average, finish carpenters charge $60 per hour. However, this hourly rate will vary depending on where you live, the scope of the project and other factors. For a more accurate estimate, ask for price quotes from at least three finish carpenters in your area.

Carpenters are skilled craftsmen who build things out of wood. Depending on what the carpenter builds, they may be referred to by various names. A framer is a carpenter who puts up the framing on a house. A trim or finish carpenter installs the finishing touches of prefabricated or custom trim and detail work once a house has been built and the walls are up. A furniture maker or woodworker builds furniture — such as tables, beds and dressers — out of wood. A cabinetmaker is a carpenter who builds custom and semi-custom wood cabinets. If you’re having a home built or remodeled, your general contractor will either provide or subcontract the carpentry work for the framing, cabinets and trim. You can hire a carpenter directly to update the trim in your home, build you a piece of custom furniture, or repair or replace your wood cabinets.

There are 143 five star Carpenters in Golden Valley, MN on Thumbtack.

Why hire professionals on Thumbtack?
Free to use

You never pay to use Thumbtack: Get cost estimates, contact pros, and even book the job—all for no cost.

Compare prices side-by-side

You’ll know how much your project costs even before booking a pro.

Hire with confidence

With access to 1M+ customer reviews and the pros’ work history, you’ll have all the info you need to make a hire.