Petersburg, VA6 Sheet Metal Roofing Professionals near you

Where do you need the sheet metal roofing professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Petersburg Sheet Metal Roofing Professionals

Browse these sheet metal roofing companies with great ratings from Thumbtack customers in Petersburg.

Tan the Handyman
4.7
from 508 reviews
  • 8 years in business
  • 675 hires on Thumbtack
Martin S.
Verified review

I contacted Tony to do a number of small repair and electrical projects around our house. He responded quickly when I called him and came by to walk through the items I had listed and he gave me an approximate, reasonable, cost on each item on the list from fixing of electrical outlets to installing a replacement ceiling fan. As we talked the list grew a bit with the addition of repair of a section of sheet-rock ceiling and rerunning an exposed TV cable to the basement. He was able start the work in less than a week and Tony and his team knocked out most of the items on the list within a few days. We still have a few items to finish pending warmer weather. We'll keep working with Tony and will have more projects to do.

service one contractors
4.4
from 109 reviews
  • 12 years in business
  • 147 hires on Thumbtack
Suellen P.
Verified review

I had water damage to subflooring from door leaks. We needed the entire subfloor in the laundry room and a piece about 8' x 24" in our Family Room replaced, with Durock in the laundry so I could lay tile later. The laundry room had linoleum but the family room has 3/4" hardwood. I had enough leftover wood to replace what had to be torn out to get to the subfloor, so the crew did that as well. I was impressed by the quality of the work and the pride in workmanship. They determined the cause of the water leaks after removing the door casement in the laundry room which revealed that the wood under the door threshold was completely saturated with water and had been finding an outlet into the subfloor because it had not been properly wrapped with waterproofing material during construction. Although there was plastic wrapping under the wood, it only covered about 1/2 of the side exposed to the exterior of the house siding, which allowed water leaking in from the top to run down between the plastic and the wood- effectively trapping it there every time it rained. The crew fixed that by wrapping the new wood they put down correctly. There were a number of things like the above that occurred as the dug into the damage that had been done, but I feel confident that they removed everything that had been exposed to moisture and replaced it, but stuck to their quoted estimate for the job. Don't know if we should name our crew online, but ours deserves to be singled out. They worked until 9PM the first night and were back the next day to complete the job by the end of the afternoon. We'll certainly use them again the next time we need a help with a project. Jericho Croft Farm

Master Pro Services Inc
4.7
from 56 reviews
  • 5 years in business
  • 72 hires on Thumbtack
Emilian G.
Verified review

I had Master Pro Services replace a flat metal roof at my 80 years old house with TPO membrane. Not a big job, just a portion of 400 SF from entire roof. Carlos came over to estimate the job in weekend. He gave me a reasonable price and was able to do the job one week after. He completed in one day and a half. Being an old house he found few problems with the wood under the old roof, he took pictures and replaced few pieces for a decent extra charge. Next few days after he replaced my roof we had very hard rain. New roof passed the "water test" with success...I will recommend Master Pro Services to all my friends and family.

Lamar Builders LLC
5.0
from 5 reviews
  • 3 years in business
  • 13 hires on Thumbtack
Anthony K.
Verified review

I had a leak in my roof between the original roof and an addition that allow water to drain into my utility room through the sheet rock. I had attempted to solve the problem by applying a few layers of roofing cement. Greg came through and removed all of the roofing cement, locating the leak and repair the roof with new shingles and taking out all of the old sheet rock and replacing it with new materials. Then he repaired and painted the ceiling to make it blend in with the rest of the my home. I was more than satisfied with the results and at a very fair price.

KBS ROOFING CO
4.5
from 4 reviews
  • 1 year in business
  • 3 hires on Thumbtack
Michael S.
Verified review

Keith with kbs roofing e-mailed me very quickly after I posted on thumbtack looking for a roofer. He was very polite and curtious and set up an appointment to come out and look at what I needed.I have an old metal roof horse barn that was beginning to leak and needed repairs keith looked at what i had and gave me options and prices on the spot that where very reasonable. I decided to give him the work and am very glad i did. Keith went above and beyond what I was looking for,I was looking for someone to just roll some roof sealer on my metal roof. Keith spent extra time making sure to replace any missing screws and tighten all the loose ones. He also put a epoxy over every single screw head on the entire roof just to make sure I had no leaks. He also put epoxy on all the seams and this is a 1500 sq ft roof so there were hundreds of screws he covered by hand. He then rolled the roof and it came out beautiful. I am 100% pleased with not only the work performed by Keith but also his desire to do the job right!! Kbs roofing gets an A+ in my book and i will certainly be calling them for any future roofing jobs.

Row-Mic Construction, Inc.
4.0
from 3 reviews
  • 48 years in business
  • 5 hires on Thumbtack
James E.
Verified review

The job was to repair a leak in the roof. I found the work done by this company to be excellent. The technician was thorough, attended to the details of the work, and made appropriate corrections. Plus he showed up on time and was prepared to begin the work when he arrived.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

What is a standing seam metal roof?

A standing seam metal roof may be a strong, durable, safe choice when you’re considering metal roofing installation options. A standing seam refers to the raised seam where the sheet metal roofing panels join. Traditionally, shingles and roof panels lie flush to the roof, making them more prone to rust or penetration by water at their seams. In a standing seam metal roof, the raised (or standing) seams run vertically from the roof ridge to the eaves, with no horizontal seams. In addition, the fasteners joining the metal panels together are concealed, providing even fewer opportunities for water or moisture to build up. The cost to install a standing seam metal roof will depend on the type of metal you select, the size of your roof, and the cost of roofing labor in your region. Materials will play a major role in your metal roofing installation costs. If you select standard galvanized steel, the cost per square (100 square feet) might be in the $150-$300 range, while a high-end choice such as copper or zinc could be between $1,000 and $1,500 per square. Here is one example of cost:   

  • Standing seam metal roof: $300 per square to start, including materials and labor.
    • A 30-square roof could cost $9,000 or more.

Can a metal roof be installed over shingles?

Metal roofs are durable, environmentally friendly, safe and budget-friendly. If you’re considering an update, metal roofing installation doesn’t have to mean completely removing your old roof. In many cases, metal roofing can be installed over your existing shingles. Research building codes in your state, as many require that after two roofs have been installed, all roofing materials must be completely removed before a third roof can be put on. This protects your home’s structural integrity and your family’s safety. Carefully read contractor reviews and choose someone with extensive experience with metal roofing installation. One concern when installing metal over shingles is that over time, condensation can build on the shingles and cause the metal to rust. This will lead to rust around the panels, making them more likely to come loose in a storm. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000. The wide price range represents different roof sizes, different types of metal, and the cost of labor in different parts of the country — and can also include the cost of removing an old shingle roof prior to installing the metal. As a line item, the average cost of removing an old roof to prepare for installing a new roof, plus adding new roof decking, costs on average about $45-$75 per square (the pro roofer’s term for 100 square feet), depending on the pitch of the roof. Always make sure you have a clearly written contract and a warranty on both the labor and the metal.

 

How much does it cost for a metal roof?

Metal roofing installation is an attractive option thanks to metal’s long lifespan, hardiness and fire-retardant properties. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000.There are different types of metal roofs, each with their own installation needs and materials costs. Roof size also affects your metal roofing installation costs, as do regional labor rates. Roof size is measured in squares; one square equals 100 square feet. Here are some examples of the average cost for a metal roof:

  • Standard metal roof: $120-$150 per square to start, including materials and labor
    • A 30-square roof (a 3,000-square-foot roof) could cost between $3,600 and $4,500 for a typical three-bedroom home.
  • Snap-Loc metal roof: $200-$225 per square to start, including materials and labor.
    • A 30-square roof could cost $6,000-$6,750.
  • Standing seam metal roof: $300 per square to start, including materials and labor.
    • A 30-square roof could cost $9,000 or more.
  • Tuff-Rib metal roof: $250-$350 per square to start, including materials and labor.
    • A 30-square roof could cost $7,500-$10,500.
  • Mid-range metal roof package, including all accessories: $300-$500 per square.
    • A 30-square roof could cost $9,000-$15,000.
  • High-end metal roof package — such as zinc or copper — and all accessories: $1,000-$1,500 per square.
    • A 30-square roof could cost $30,000-$45,000.
Hire skilled professionals for absolutely everything.