Natchez, MS11 Roofing Professionals near you

Where do you need the roofing professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Natchez Roofing Professionals

Browse these roofing contractors with great ratings from Thumbtack customers in Natchez.

Roy Bowman
4.2
from 12 reviews
  • 14 years in business
  • 13 hires on Thumbtack
Emma L.
Verified review

Mr. Bowman was prompt, polite and professional. I had him to remodel by bathroom and make it handicap accessible. He had to change out my bathtub and put in a shower, widen my bathroom door, install new plumbing, install grab bars, put in a handicap toilet, plumbing fixtures and level my floor. I was very satisfied and referred him to a friend.

  • 10 years in business
About

We provide residential or commercial repairs or installations. We measure and figure materials for whatever the job needs. We give a fair price bid. If bid is excepted, half of the money will be needed up front, maybe a couple of draws during and the remainder upon completion.

  • 14 years in business
About

We do metal and shingle roofing. We do tear offs, new roofs,flat roofing and roof repairs. We guarantee all our work. The job is not complete until you're hundred percent satisfied. I have 17 years of experience. We use hand nails only.

About

We work close with the Clint try to beable to adjust the build to their personal degisn. It's their build we're just there to add a professional hand with over 15 years if experience in home improvement.

About

Let me build you the metal building that you have always wanted. I can also replace your worn-out shingle roof with a new metal one. I have over 30 years of experience.

About

We are the last roofer you will ever need. We do it right the first time. We have been in business for over 20 years.

About

We stand behind our work making sure all customers are pleased

About

We do roofing, metal roofing, metal buildings, gutters and sidings for residential and commercial properties. We work throughout Louisiana.

  • 23 years in business
About

If it's worth doing!!!!! its worth doing right!!!!!

About

We do house maintenance and home improvement general labor. We do metal and shingle roofing. We have twenty years of experience. No job is too small; we do it all.

  • 8 years in business
About

Because I have experience and knowledge of the steps taken in my field of work. Its an honest job. Would consider a different field of work if the opportunity came along and it was more profitable.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

What is a standing seam metal roof?

A standing seam metal roof may be a strong, durable, safe choice when you’re considering metal roofing installation options. A standing seam refers to the raised seam where the sheet metal roofing panels join. Traditionally, shingles and roof panels lie flush to the roof, making them more prone to rust or penetration by water at their seams. In a standing seam metal roof, the raised (or standing) seams run vertically from the roof ridge to the eaves, with no horizontal seams. In addition, the fasteners joining the metal panels together are concealed, providing even fewer opportunities for water or moisture to build up. The cost to install a standing seam metal roof will depend on the type of metal you select, the size of your roof, and the cost of roofing labor in your region. Materials will play a major role in your metal roofing installation costs. If you select standard galvanized steel, the cost per square (100 square feet) might be in the $150-$300 range, while a high-end choice such as copper or zinc could be between $1,000 and $1,500 per square. Here is one example of cost:   

  • Standing seam metal roof: $300 per square to start, including materials and labor.
    • A 30-square roof could cost $9,000 or more.

Can a metal roof be installed over shingles?

Metal roofs are durable, environmentally friendly, safe and budget-friendly. If you’re considering an update, metal roofing installation doesn’t have to mean completely removing your old roof. In many cases, metal roofing can be installed over your existing shingles. Research building codes in your state, as many require that after two roofs have been installed, all roofing materials must be completely removed before a third roof can be put on. This protects your home’s structural integrity and your family’s safety. Carefully read contractor reviews and choose someone with extensive experience with metal roofing installation. One concern when installing metal over shingles is that over time, condensation can build on the shingles and cause the metal to rust. This will lead to rust around the panels, making them more likely to come loose in a storm. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000. The wide price range represents different roof sizes, different types of metal, and the cost of labor in different parts of the country — and can also include the cost of removing an old shingle roof prior to installing the metal. As a line item, the average cost of removing an old roof to prepare for installing a new roof, plus adding new roof decking, costs on average about $45-$75 per square (the pro roofer’s term for 100 square feet), depending on the pitch of the roof. Always make sure you have a clearly written contract and a warranty on both the labor and the metal.

 

How much does it cost for a metal roof?

Metal roofing installation is an attractive option thanks to metal’s long lifespan, hardiness and fire-retardant properties. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000.There are different types of metal roofs, each with their own installation needs and materials costs. Roof size also affects your metal roofing installation costs, as do regional labor rates. Roof size is measured in squares; one square equals 100 square feet. Here are some examples of the average cost for a metal roof:

  • Standard metal roof: $120-$150 per square to start, including materials and labor
    • A 30-square roof (a 3,000-square-foot roof) could cost between $3,600 and $4,500 for a typical three-bedroom home.
  • Snap-Loc metal roof: $200-$225 per square to start, including materials and labor.
    • A 30-square roof could cost $6,000-$6,750.
  • Standing seam metal roof: $300 per square to start, including materials and labor.
    • A 30-square roof could cost $9,000 or more.
  • Tuff-Rib metal roof: $250-$350 per square to start, including materials and labor.
    • A 30-square roof could cost $7,500-$10,500.
  • Mid-range metal roof package, including all accessories: $300-$500 per square.
    • A 30-square roof could cost $9,000-$15,000.
  • High-end metal roof package — such as zinc or copper — and all accessories: $1,000-$1,500 per square.
    • A 30-square roof could cost $30,000-$45,000.
Hire skilled professionals for absolutely everything.